Pioneer DJM 909 Owner's Manual - Page 12

PART NAMES AND FUNCTIONS Front Panel 52 53 FADER REVERSE CH-1 C.F. CH-2 ON ON ON OFF OFF OFF FOOT SW CH-1 CH-1 OFF CH-2 PROFESSIONAL 2CHANNEL MIXER DJM-909 FADER CURVE CROSS FADER 1 CROSS FADER 2 FADER CUT LAG MIN MAX FADER START C.F. 1 CH-1 C.F. 2 CH-2 PHONES CH-2 POWER 54 55 58 57 56 52 FADER REVERSE switches CH-1 ON/OFF When set to [ON], the top panel's CH-1 REVERSE indicator lights, and the CH-1 fader lever operates in the reverse direction (scale mark "0" becomes 0 dB attenuation, and "10" becomes minus infinity). The fader start function also operates in reverse. CH-2 ON/OFF When set to [ON], the top panel's CH-2 REVERSE indicator lights, and the CH-2 fader lever operates in the reverse direction (scale mark "0" becomes 0 dB attenuation, and "10" becomes minus infinity). The fader start function also operates in reverse. C.F. ON/OFF When set to [ON], the top panel's cross fader REVERSE indicator lights, and the cross fader lever operates in the reverse direction (left side becomes CH-2, and right side becomes CH-1). The fader start function also operates in reverse. 53 FADER START selector switches C.F.1 / CH-1 This switch determines whether the fader start operation for the CD player connected to CH-1 is activated by the cross fader lever, or by the CH-1 fader lever. When the top panel's CH-1 FADER START button is set to On, selecting [C.F.1] causes the top panel's C.F.1 FADER START indicator to light, and selecting [CH-1] causes the top panel's CH-1 FADER START indicator to light. C.F.2 / CH-2 This switch determines whether the fader start operation for the CD player connected to CH-2 is activated by the cross fader lever, or by the CH-2 fader lever. When the top panel's CH-2 FADER START button is set to On, selecting [C.F.2] causes the top panel's C.F.2 FADER START indicator to light, and selecting [CH-2] causes the top panel's CH-2 FADER START indicator to light. 54 Headphone output jack (PHONES) Accepts a 6.3 mm stereo headphones plug. 55 POWER switch 56 Fader attenuation dials (FADER CURVE) CH-1 Use to adjust CH-1's fader attenuation curve. CH-2 Use to adjust CH-2's fader attenuation curve. CROSS FADER 1 Use to adjust cross fader's CH-1 attenuation curve. CROSS FADER 2 Use to adjust cross fader's CH-2 attenuation curve. FADER CUT LAG Use to adjust mechanical play at both extremes of the cross fader movement (the range in which lever movement produces no effect). (See page 17, "Fader attenuation curve adjustment".) 57 Foot switch channel select switch (FOOT SW CH-1/OFF/CH-2) Use to select whether the Effect On/Off foot switch function operates on channel 1 [CH-1], channel 2 [CH-2]. When the switch is in the center position, both CH-1 and CH-2 are [OFF]. 58 Foot switch jack (FOOT SW) This 6.3 mm RCA jack can be used to connect an On/Off type pedal switch used to turn effects On and Off. Various types of foot switch are available; some turn On when pressed, some turn Off when pressed, and others have locking mechanisms (alternate On/Off with successive presses). Select the type in accordance with your own preferences. 12