Pioneer DMH-1500NEX Owners Manual - Page 11
Basic operation
View all Pioneer DMH-1500NEX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
English Basic operation Resetting the microprocessor CAUTION • Pressing the RESET button resets settings and recorded contents to the factory settings. - Do not perform this operation when a device is connected to this product. - Some of the settings and recorded contents will not be reset. • The microprocessor must be reset under the following conditions: - Prior to using this product for the first time after installation. - If this product fails to operate properly. - If there appears to be problems with the operation of the system. 1 Turn the ignition switch OFF. 2 Press RESET with a pen tip or other pointed tools. Settings and recorded contents are reset to the factory settings. Starting up the unit 1 Start the engine to boot up the system. The [Select Program Language] screen appears. NOTE From the second time on, the screen shown will differ depending on the previous conditions. 2 Touch the language. 3 Touch . The [Speaker Mode Settings] screen appears. 4 Touch the speaker modes. [Standard Mode] 4-speaker system with front and rear speakers, or a 6-speaker system with front and rear speakers and subwoofers. [Network Mode] 3-way system with a high range speaker, middle range speaker and subwoofer (low range speaker) for reproduction of high, middle and low frequencies (bands). WARNING Do not use the unit in Standard Mode when a speaker system for 3-way Network Mode is connected to the unit. This may cause damage to the speakers. - 11 -