Pioneer DMP-555 Owner's Manual - Page 9
Connecting the power cord, Computer connection, Connecting to other devices - software
View all Pioneer DMP-555 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
BEFORE OPERATIONS: CONNECTIONS 4. Connecting to other devices A Connecting to other mixers Connect the AUDIO OUT and CARD MONITOR terminals on the unit with the Line In terminals or AUX terminals on the mixer. (Do not use the Phono terminals. Otherwise the sound will become distorted and prevent normal playback.) B Connecting to a stereo amplifier (when not using a DJ mixer) Stereo amplifier Connect to the AUX input terminals. (Do not use the Phono input terminals.) DMP-555 Supplied audio cable C Connecting to a component with a digital input terminal CD recorder or amplifier with digital inputs Digital signal cable DMP-555 ÷ Set the Digital mode switch (DIGITAL OUT) to ON when using the digital output terminal. NOTE: When the Digital mode switch (DIGITAL OUT) is set to ON, the DJ functions (cue, loop, reloop, tempo adjust, Jog dial, Card mixing and Isolator) do not work. And the muted pause mode is used instead of the audible pause mode. 5. Connecting the power cord When all connections have been made, connect the power plug to an AC wall outlet or to a power receptacle on the rear panel of the amplifier. 6. Computer connection When the provided USB cable is used to connect the Digital media player's USB connector to a computer's USB connector, the Digital media player's jog dial and TEMPO control slider can be used to control the accessory software program "DJ Booth." The software (on CD-ROM) provided with the Digital media player must be installed on your computer in order for your computer to recognize the Digital media player. For details, consult the software installation manual. DMP-555 Computer Supplied USB cable 9 En