Pioneer DRM-602X DRM-602X Owner's Manual - Page 17
Quick Installation
View all Pioneer DRM-602X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Chapter 3 IBM DOS / WINDOWS Driver Installation Quick Installation Installing software drivers so you can use your Pioneer CD-ROm Changer with your computer is easy! This flow chart details the installation process. If you are installing from the DOS prompt, follow the DOS instruction path on the left side of the chart. If you are installing from WINDOWS, follow the path on the right. DOS WINDOWS Insert the IBM-PC & Compatible Driver Diskette into the floppy drive on your computer. At the DOS Prompt, Type A: or B: for the letter of the drive you are installing the software from, then Press [ENTER]. At the A:\ or B:\ DOS Prompt, type INSTALL and press [ENTER]. This will begin the Installation Program. At the DOS prompt type WIN to bring up WINDOWS. Click on the FILE option in the Menu Bar and click on the RUN option. In the pop-up dialog box, type A:INSTALL or B:INSTALL. Note: The screen may go blank for a few seconds while the program loads. To execute a Quick Installation of the drivers, select the QUICK INSTALL option from the main menu, accept the default options and press [ENTER]. See the following pages for details about using the installer. You will then see this message: Installation Completed Successfully! Exit the Install Program, reboot your computer and you are ready to use your Changer. (See page 3-9, Using your Pioneer CD-ROM Changer.) Figure 3 - DOS/WINDOWS - Quick Install Process 3-2 Software Driver Installation Guide / Owner's Manual