Pioneer DVR-233-S Service Manual - Page 61
JCKB Assy, Diagnosis, Note when the JCKB Assy is replaced
View all Pioneer DVR-233-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
5 2 JCKB Assy 1 Remove the three screws. 2 Remove the bridge. 6 2 Bridge 1 11 JCKB Assy 3 Disconnect the flexible cable. 4 Remove the one screw. 5 Remove the one screw. 6 Remove the four screws. 7 Remove the six screws. 8 Remove the JCKB Assy. Rear view 66 5 66 4 7 7 7 7 8 3 CN301 CN2301 7 JCKB Assy 7 MAIN Assy 7 8 9 Cover the transistor (Q308) with the clip type heatsink. A JCKB Assy 9 Transistor (Q308) Clip type heatsink (GGF1528) B 10 Connect the connector from front panel section. 11 Connect the flexible cable for service. 12 Arrange the unit as shown in the photo below. JCKB Assy CN301 11 Flexible cable for service C (GGD1436) CN201 10 CN2301 Front panel section MAIN Assy D Diagnosis Note when the JCKB Assy is replaced E When the JCKB Assy is replaced, also replace the rubber foot (VEB1349) behind the FL tube with new one. Do NOT reuse the old rubber foot. FL tube Rubber foot JCKB Assy Rear view F DVR-231-S 61 5 6 7 8