Pioneer DVR-320-S Owner's Manual - Page 48
Pluscode - no power
View all Pioneer DVR-320-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
06 Recording VCR Plus+ CLEAR ENTER HOME MENU Tip • You can check the timer program settings by pressing TIMER REC to display the timer recording screen. VCR Plus+ programming with the power off You can enter a PlusCode number when the recorder is in standby. REC MODE ì VCR Plus+ CLEAR 1 Press 'VCR Plus+' to display the VCR Plus+ program screen. You can also access this screen from the Home Menu (press HOME MENU, select Timer Recording, then VCR Plus+). VCR Plus+ PlusCode# 3 9 9 2 4 0 9 to input Rec Mode MN21 REC MODE to change to change level Rec Times Once Daily Weekly to change • Use the number buttons to enter the PlusCode number. (To clear the last digit entered, press CLEAR.) • Press REC MODE to change the recording quality (see also Setting the picture quality/recording time on page 43). If Manual Recording is on, then you can also select the MN setting. • Use the / (cursor left/right) buttons to select the Once, Daily or Weekly recording option. 2 After making the settings, press ENTER. The program details are shown at the bottom of the screen for a few seconds then the screen is automatically exited. • If you haven't set up the guide channels (or at least the guide channel for the PlusCode number that you entered), the recorder will prompt you to enter the channel number that the TV program is showing on. ENTER Important • You can't use this feature until you have set up the guide channels. See VCR Plus+ CH Setting on page 77 • You can't change the recording mode. • You can't program daily or weekly timer recordings. 1 Press 'VCR Plus+'. The front panel display shows the current recording mode and prompts you to enter the PlusCode number. P LUS CODE 2 Use the number buttons to enter the PlusCode number. 2 932 4 • To clear the last digit entered, press CLEAR. 3 Press ENTER. The display shows the timer settings: Date Start time End time Recording channel. • If CODE ERROR appears in the display, check that the PlusCode number is correct and start again from step 1. • If CAN'T SET appears in the display, it means that although you entered a valid PlusCode number, the program has already finished, or the guide channel is not set. 48 En