Pioneer DVR-X162Q Operating Instructions - Page 7

INTERFACE FRONT VIEW ① Forced Ejection Hole If the tray fails to eject when the Eject button is pressed, insert a stiff rod into the hole and push to eject the tray. During normal operation, the eject button should be used to unload the tray. Turn the power to the drive OFF then wait approximately one minute until the disc stops spinning before trying to eject the tray redundant prepositional phrase. ② BUSY Indicator Operation status is indicated as follows: During reading Lights During writing Lights ③ Eject Button Press the button to unload / load the disc. ④ Disc Tray Press the Eject button to open the loading tray then place a CD or DVD disc onto the tray with the label facing up. Press the Eject button again or gently push the tray to close and load. Do not attempt to forcibly pull out the disc tray - use the Forced Ejection Hole ①. ABOUT REGION CODES The region code can only be changed five (5) times, including the initial setting. Please be aware that the fifth change becomes PERMANENT. Therefore, avoid changing the region code unless absolutely necessary. ƒ Region codes are part of the DVD Standard. However, region codes on DVD discs are optional. DVD discs with no specified region code can be played on all compliant players. 7 En