Pioneer DVR-XD08 Operating Instructions - Page 10

DVR-XD08_EU_en.fm 10 Operations The unit writes to DVD-R/-RW media when the supplied software application is installed on your PC. Writing fails if the PC or operating system does not support the software. Begin writing to DVD-R/-RW 1 Connect the necessary cables (USB cable and AC adapter). 2 Turn on the PC. 3 Press the Eject button to open the tray. 4 Place the disc in the tray with the label facing up. 5 Close the tray by pushing gently with your finger. 6 Start the disc-burning application. End the writing session 1 Quit the disc burning application. 2 Press the Eject button to open the tray. 3 Remove the disc. 4 Close the tray by pushing gently with your finger. 5 Shut down the PC. 6 Remove AC adapter from the unit and AC wall outlet. For software installation directions, please refer to the manual available on the software disc included with your drive. For assistance with writing or playing back discs, see the HELP function within the software application. Manual disc ejection Use the manual eject hole to remove discs if the tray fails to open and all other methods have been exhausted. 1 Shut down the PC. 2 Wait for the disc to stop spinning. 3 Insert a straightened paper clip or small wire into the manual eject hole. 4 Press firmly until the tray protrudes by at least a 5 mm to 10 mm. 5 Gently pull the tray straight out and remove the disc. Warning To prevent injury and damage to the unit, do NOT force the tray to open while the disc is spinning. 10 en