Pioneer DVR-XD10 Installation Manual - Page 10

Operations The unit writes to DVD-R/-RW media when the supplied software application is installed on your PC. Writing fails if the PC or operating system does not support the software. Begin writing to DVD-R/-RW 1 2 3 4 5 6 Connect the necessary USB cable. Turn on the PC. Press the OPEN button, and gently lift the disc cover by hand. Place the disc in the tray with the label facing up. Close the disc cover gently. Start the disc-burning application. End the writing session 1 Quit the disc burning application. 2 Press the OPEN button, and gently lift the disc cover by hand. 3 Remove the disc. 4 Close the disc cover gently. 5 Shut down the PC. • For software installation directions, please refer to the manual available on the software disc included with your drive. For assistance with writing or playing back discs, see the HELP function within the software application. • When the lock mechanism is released, the disc cover needs to be fully opened in order to close again. Manual disc cover open Use the Forced Open Lever to remove discs if the disc cover fails to open and all other methods have been exhausted. 1 Shut down the PC. 2 Wait for the disc to stop spinning. 3 Slide the Forced Open Lever to open the disc cover. 4 Gently open the disc cover and remove the disc. Warning To prevent injury and damage to the unit, do NOT force the disc cover to open while the disc is spinning. 10 En