Pioneer DXT-X2769UI Owner s Manual - Page 5
Detaching the front panel, Setting the clock CLOCK SET, Canceling the demonstration display DEMO OFF - no sound
View all Pioneer DXT-X2769UI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Display indication Indication Description Appears when a lower tier of the menu or folder exists. Appears when the button is pressed. Appears when the local seek tuning function is set (page 9). Appears when the sound retriever function is set (page 10). Appears when random/shuffle play is set. Appears when repeat play is set. Appears when the iPod control function is set (page 8). Detaching the front panel Detach the front panel to prevent theft. Remove any cables and devices attached to the front panel and turn off the unit before detaching it. Detach Attach Important • Avoid subjecting the front panel to excessive shock. • Keep the front panel out of direct sunlight and high temperatures. • Always store the detached front panel in a protective case or bag. Setting the clock (CLOCK SET) When you turn the ignition switch to ON after installation, [SET UP :YES] appears in the display. 1 Press the M.C. dial. The setup menu disappears after 30 seconds of no operation. If you prefer not to set at this time, turn the M.C. dial to select [NO], then press to confirm. 2 Turn the M.C. dial to adjust the hour, then press to confirm. The indicator moves to the minute setting automatically. 3 Turn the M.C. dial to adjust the minute, then press to confirm. [QUIT] appears. 4 Turn the M.C. dial to select [YES], then press to confirm. NOTES • You can cancel the menu setting by pressing SRC/OFF. • This setting can be made at any time. See page 10 for more details. Canceling the demonstration display (DEMO OFF) 1 Press the M.C. dial to display the main menu. 2 Turn the M.C. dial to select [SYSTEM], then press to confirm. 3 Turn the M.C. dial to select [DEMO OFF], then press to confirm. 4 Turn the M.C. dial to select [YES], then press to confirm. INITIAL settings 1 Press and hold SRC/OFF until the unit turns off. 2 Press the M.C. dial to display the main menu. 3 Turn the M.C. dial to select [INITIAL], then press to confirm. 4 Turn the M.C. dial to select an option, then press to confirm. Menu Item SP-P/O MODE [REAR/SUB.W] Description Select when there is a full-range speaker connected to the rear speaker output leads and there is a subwoofer connected to the RCA output. En 5 English