Pioneer F500BT Owner's Manual - Page 110

Appendix Appendix Messages for Audio Functions When problems occur with AV source playback, an error message appears on the display. Refer to the table below to identify the problem, then take the suggested corrective action. If the error persists, contact your dealer or your nearest Pioneer Service Center. SD/USB/iPod Message Cause Action (See) Non-playable tracks are skipped. Files that are protected by digital rights management. The protected files are skipped. Impossible to play all tracks. All the files on the inserted external Store playable files. storage device are secured by DRM. An error occurred on USB con- The USB connector or USB cable is Confirm that the USB connector or USB nection. USB devices are not short-circuited. cable is not caught in something or da- available to use and iPod maged. power supply is also unavail- The connected USB storage device Disconnect the USB storage device and do able. consumes more than 500 mA (maxi- not use it. Turn the power off, then turn the mum allowable current). power on and connect the compliant USB storage device. The USB interface cable for iPod is Confirm that USB interface cable for iPod or short-circuited. USB cable is not caught in something or da- maged. Connected iPod is not supported. Please check instruction manual. The iPod is not compatible with this Use an iPod with a compatible version. navigation system. iPod connection failed. Please Communication failure reconnect. • Disconnect the cable from iPod. Once iPod main menu is displayed, connect the cable again. • If the message appears frequently, consult your dealer. Updating VR dictionary. Please wait. iPod function is restricted because the navigation system is trying to acquire the information needed to operate iPod with voice commands from the iPod currently connected. • Wait on the iPod basic screen (Music) until "iPod VR activation process complete." appears. • Switch the screen to another screen to cancel the acquiring process. (In such case, the acquiring process will resume when the iPod basic screen (Music) is displayed.) (Page 97) Voice Synching...My voice system will be busy until I'm finished, but you can use the touch interface Voice operation is restricted because the navigation system is trying to acquire the information needed to operate iPod with voice commands from the iPod currently connected. • Wait on the iPod basic screen (Music) until "iPod VR activation process complete." appears. • Switch the screen to another screen to cancel the acquiring process. (In such case, the acquiring process will resume when the iPod basic screen (Music) is displayed.) (Page 97) 110 En