Pioneer F900BT Installation Manual - Page 10
Connecting the power cord 1, Connecting the System - no lights
UPC - 012562890265
View all Pioneer F900BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Section 03 Connecting the System Connecting the power cord (1) Yellow To terminal always supplied with power regardless of ignition switch position. Red To electric terminal controlled by ignition switch (12 V DC) ON/OFF. Orange/White To lighting switch terminal. Black (ground) To vehicle (metal) body. Note When a subwoofer is connected to this navigation system instead of a rear speaker, change the rear output setting in the Initial Setting. (Refer to "Operation Manual".) The subwoofer output of this navigation system is monaural. Front speaker Left Rear speaker or Subwoofer (4 Ω) White White/Black Green Green/Black With a 2 speaker system, do not connect anything to the speaker leads that are not connected to speakers. Gray Gray/Black Violet Violet/Black Front speaker Right Rear speaker or Subwoofer (4 Ω) When using a subwoofer of 70 W (2 Ω), be sure to connect with violet and violet/black leads of this navigation system. Do not connect anything with green and green/black leads. Not used. Green Green/Black Violet Violet/Black Subwoofer (4 Ω) 2 10 En