Pioneer FH-P4200MP Owner's Manual - Page 44
Adjusting display contrast, Switching the RCA output, setting, Selecting the digital, attenuator, - cd cassette player
UPC - 012562728421
View all Pioneer FH-P4200MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Section 11 Initial Settings 1 Press FUNCTION to select Dim. Press FUNCTION repeatedly until Dim appears in the display. 2 Press a or b to turn Dim on or off. Pressing a or b will turn Dim on or off and that status will be displayed (e.g., Dim :ON). Adjusting display contrast Display contrast adjustment lets you adjust the display for easier viewing when lighting conditions change. 1 Press FUNCTION to select CONT. Press FUNCTION repeatedly until CONT appears in the display. 2 Press c or d to adjust the contrast. Each press of c or d increases or decreases the contrast. 14 1 is displayed as the contrast is increased or decreased. Switching the RCA output setting This units RCA output can be used for subwoofer. You can select whether to use the subwoofer control (low pass filter) built-in P/O:Subw or the auxiliary P/O:Full. 1 Press FUNCTION to select P/O. Press FUNCTION repeatedly until P/O appears in the display. 2 Press c or d to switch RCA output setting. Pressing c or d will switch between P/O:Subw (subwoofer) and P/O:Full (non fading) and that status will be displayed. Selecting the digital attenuator When listening to a CD or other source on which the recording level is high, setting the equalizer curve level to high may result in distortion. You can switch the digital attenuator to low to reduce distortion. ! Sound quality is better at the high setting so this setting is usually used. 1 Press FUNCTION to select D.ATT. Press FUNCTION repeatedly until D.ATT appears in the display. 2 Press c or d to switch D.ATT high or low. Pressing c or d will switch between D.ATT: HI (high) and D.ATT:LOW (low) and that status will be displayed. # When the source is Cassette player, the digital attenuator setting is fixed at Low. Switching the telephone muting/attenuation Sound from this system is muted or attenuated automatically when a call is made or received using a cellular telephone connected to this unit. ! The sound turns off, Mute or ATT is dis- played and no audio adjustments are possible. ! Operation returns to normal when the phone connection is ended. 1 Press FUNCTION to select Mute. Press FUNCTION repeatedly until Mute appears in the display. 44 En