Pioneer GEX-P10XMT Owner's Manual - Page 4

XM tuner Selecting the channel in the channel category Channels are organized into various program categories, e.g. Rock, Classic, Jazz. You can search between different categories, and then search among channels within each channel category. 1 Select the channel category select mode. (Refer to "Switching the channel select mode" above.) 2 Press BAND to return to the previous display. 3 Press or to select the desired channel category. Once you select a channel category, the unit searches for channels in that category. During search, the channel category doesn't immediately change even if you press the button. To successively change the channel category, continue pressing the button. 4 Press or to select the desired channel in the selected channel category. The channel number moves up or down in the selected channel category. Channels that cannot currently be selected are skipped, and the next channel in that channel category is selected. Note If you select a channel of another category by channel recall, etc., during steps 3 and 4, the category selected in step 3 still remains in memory. If you press or , the channel number moves up or down in the category selected in step 3 regardless of the category of the present channel. Display the ID code (Radio ID) Each XM tuner is identified with a unique Radio ID. You will need the Radio ID when activating XM service or when reporting a problem. How to display the ID code depends on the channel select mode. Note Carefully check your XM Radio ID. The letters F, I, O, and S are not used. Channel number select mode If you select CH 000, the ID code is displayed. Press or to select the channel number zero (CH 000). Channel category select mode RADIO ID is provided as a channel category for displaying the ID code. Press or to select the RADIO ID from channel category. Notes • If you select another channel, display of the ID code is canceled. • Display of the ID code repeats displaying RADIO ID and the ID code one after the other. En Additional Information Messages When problems occur with the XM tuner, a message appears on the display. Refer to the table below to identify the problem, then take the suggested corrective action. Message ANTENNA UPDATING NOSIGNAL LOADING OFF AIR Cause The XM antenna is not connected. A short-circuit occurring in the antenna or the surrounding antenna cable. Radio is being updated with latest encryption code. XM signal is too weak at the current location. Unit is acquiring audio or program information. The channel currently selected has stopped broadcasting. The user has selected a channel number that does not exist or is not subscribed to. There is no artist name/feature, song/program title, or channel category associated with the channel at that time. Action Check whether the XM antenna cable is attached securely. Make sure that there is nothing unusual with the antenna or antenna cable. Turn the ignition off and then on. Wait until the encryption code is fully updated. Channels 000 and 001 should function normally. Wait until the car reaches a location with a stronger signal. Wait until the unit has received the information. Select another channel. Automatically switches to Channel 001. No action needed. Note When the messages that is not listed above are displayed, refer to the operation manual supplied with the head unit. En Additional Information Specifications General Power source 14.4 V DC (10.8 - 15.1 V allowable) Grounding system Negative type Max. current consumption 2.0 A Dimensions (W × H × D) ..... 179 × 27 × 139 mm (7 × 1 × 5-1/2 in.) Weight 0.57 kg (1.26 lbs) XM tuner Frequency range 2,332.50 - 2,345.00 MHz Usable sensitivity Satellite 105.0 dBm Terrestrial 102.0 dBm Audio Signal-to-noise ratio 90 dB (IHF-A network) Separation 85 dB Antenna Power source (Provided by the satellite line 4.9 V DC (4.4 - 5.4 V allowable) Max. current consumption 0.1 A Type Active type Dimensions Base (W × H × D) ........ 29 × 14 × 40 mm [1-1/8 × 1/2 × 1-5/8 in] Cord 5 m Weight 0.06 kg (0.13 lbs) Note Due to possible improvements, specifications and design are subject to change without notice. En