Pioneer GM-D7500M Owner's Manual - Page 12

Appendix Additional information Specifications Power source 14.4 V DC (10.8 V to 15.1 V allowable) Grounding system Negative type Current consumption 18 A (at continuous power, 4 W) Average current drawn ......... 5.2 A (4 W for one channel) 10.3 A (2 W for one channel) Fuse 40 A × 1 Dimensions (W × H × D) ... 245 × 56 × 200 mm (9-5/8 × 2-1/4 × 7-7/8 in.) Weight 2.1 kg (4.6 lbs) (Leads for wiring not included) Maximum power output ....... 400 W × 1 (4 W) / 800 W × 1 (2 W) Continuous power output ... 200 W × 1 (at 14.4 V, 4 W, 20 Hz to 240 Hz, ≦ 1% THD) 400 W × 1 (at 14.4 V, 2 W, 50 Hz, ≦ 1% THD) Load impedance 4 W (2 W to 8 W allowable) Frequency response 10 Hz to 30 kHz (+0 dB, -3 dB) Signal-to-noise ratio 95 dB (IHF-A network) Distortion 0.03 % (10 W, 100 Hz) Low pass filter: Cut off frequency 40 Hz to 240 Hz Cut off slope 12 dB/oct Bass boost: Frequency 50 Hz Level 0 dB / 6 dB / 12 dB Gain control: RCA 200 mV to 6.5 V Speaker 0.8 V to 10 V Maximum input level / impedance: RCA 6.5 V / 22 kW Speaker 10 V / 22 kW CEA2006 Specifications Power output 200 W RMS × 1 Channel (at 14.4 V, 4 W, 20 Hz to 240 Hz and ≦ 1 % THD+N) 400 W RMS × 1 Channel (at 14.4 V, 2 W, 50Hz and ≦ 1 % THD+N) S/N ratio 72 dBA (reference: 1 W into 4 W) Notes ! Specifications and the design are subject to modifications without notice. ! The average current drawn is nearly the maximum current drawn by this unit when an audio signal is input. Use this value when working out total current drawn by multiple power amplifiers. 12 En