Pioneer GM-D9605 Owner's Manual - Page 9
Connecting the car stereo, Connecting the units - 5 channel
View all Pioneer GM-D9605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Connecting the units Section 03 English Connecting the car stereo Connect the RCA output jack of the car stereo to the RCA input jack of the amplifier, or connect the speaker output wire from the car stereo to the speaker input terminal of the amplifier. CH-A input (Two-channel input) ! Slide the 2CH-4CH INPUT SELECT (input select) switch to the 2CH position. ! Slide the A/B-SW INPUT SELECT (input select) switch to the A/B position. 1 2 CH-A CH-B input (Four-channel input) ! Slide the 2CH-4CH INPUT SELECT (input select) switch to the 4CH position. ! Slide the A/B-SW INPUT SELECT (input select) switch to the A/B position. Connection when using the RCA input jack 5 Connection when using the SP INPUT (speaker input) terminal 4 3 1 2CH-4CH INPUT SELECT (input select) switch (2CH position) 2 RCA input jack A 3 From car stereo (RCA output) If only one input plug is used, e.g. when the car stereo has only one output (RCA output), connect the plug to RCA input jack A. 4 Connecting wires with RCA plugs (sold separately) 5 A/B-SW INPUT SELECT (input select) switch (A/B position) Notes ! For details on the speaker output, refer to Con- necting the speakers on page 10. ! When the 2CH-4CH INPUT SELECT (input se- lect) switch is set to 2CH, do not connect anything to RCA input jack B. Notes ! When connecting the amplifier using the SP INPUT (speaker input) terminal, do not connect anything to the RCA input jack. ! For details on the speaker output, refer to Connecting the speakers on page 10. CH-A CH-SW input ! Slide the 2CH-4CH INPUT SELECT (input select) switch to the 2CH position. ! Slide the A/B-SW INPUT SELECT (input select) switch to the SW position. En 9