Pioneer HTD-510DV Owner's Manual - Page 21

Getting Started 5 Exchanging discs You can change any of the discs not in the play position using the EXCHANGE button. Because the disc in the play position is unaffected, you can use this button to change discs even during playback. 1 Press EXCHANGE to open the disc tray without interrupting playback. 2 Load a disc. Listening to the radio The following steps show you how to tune in to FM and AM radio broadcasts using the automatic (search) and manual (step) tuning functions. Once you are tuned to a station you can memorize the frequency for recall later-see Saving station presets on page 22 for more on how to do this. TUNER /BAND TV /AUX SYSTEM SETUP 2 ENTER 3 You can load two discs at a time in the two fully accessible disc spaces. Do not try and load discs into any of the other spaces; they may not load correctly and cause the unit to malfunction. 1 ¡ 1 2 3 MONO 4 5 6 >10 7 8 9 10/0 SHIFT 3 If you want to load more discs, press DISC SKIP to rotate the disc tray. 4 Press 0 OPEN/CLOSE or EXCHANGE to close the disc tray. • Do not push the disc tray shut by hand after exchanging discs. 1 Press TUNER/BAND to select the tuner. On the remote, press repeatedly to switch between FM and AM bands. On the front panel, the TUNER/BAND button switches between FM, AM and preset station mode. For now, choose either FM or AM. 2 Tune to a station. There are three ways to do this: • Automatic tuning To search for stations in the currently selected band, press and hold either the 1 or ¡ button for about a second. The system will start searching for the next station, stopping when it has found one. Repeat this step to search for other stations. Every time searching stops on a station, the (tuned) indicator lights in the display. 21 En