Pioneer HTP-SB300 Owner's Manual - Page 34
Additional information, Troubleshooting
View all Pioneer HTP-SB300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
06 Additional information Chapter 6 Additional information Troubleshooting Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Take a look at the other components and electrical appliances being used, because sometimes the problem may lie there. If the trouble isn't sorted out even after going through the checks below, ask your nearest Pioneer authorized independent service company to carry out repair work. • If the unit does not operate normally due to external effects such as static electricity disconnect the power plug from the outlet and insert again to return to normal operating conditions. Problem Remedy The power does not turn on. • Disconnect the power plug from the outlet, and insert again. The system suddenly switches off. • After about a minute (you won't be able to switch the unit on during this time), switch the system back on. If the message persists, call a Pioneer authorized independent service company. No sound is output when a • Make sure the component is connected correctly (refer to Connecting function is selected. up on page 12). • Press MUTE on the remote control to turn muting off. No image is output when a • Make sure the component is connected correctly (refer to Connecting up function is selected. on page 12). • Select the correct component (use the INPUT SELECT buttons). • The video input selected on the TV monitor is incorrect. Refer to the instruction manual supplied with the TV. Subwoofer sound is intermittent. • If another electronic device (cordless phone, Bluetooth wireless technology device, wireless LAN, microwave oven, etc.) using the same frequency (2.4 GHz) is operating nearby, change its location. • The high frequency range utilized by this device for signal transmission possesses the same characteristics of straight-line transmission, reflection, refraction, defraction, and interference as ordinary light waves. As a result, the efficiency of signal transmission may vary depending on the location, resulting in broken or interrupted sound. In such cases, try changing the installation location or conditions. • If signal transmission is ineffective due to excessive distance between the main unit and subwoofer, try placing the subwoofer closer to the main unit. • When using the system in an area subject to frequent static or electrical noise, try changing the subwoofer's installation location. 34 En