Pioneer KEH-P4020 Owner's Manual - Page 9

English Español Deutsch Tuner Storing and recalling broadcast frequencies If you press any of the PRESET TUNING buttons you can easily store up to six broadcast frequencies for later recall with the touch of a button. When you find a frequency that you want to store in memory press a PRESET TUNING button and hold until the preset number stops flashing. The number you have pressed will flash in the PRESET NUMBER indicator and then remain lit. The selected radio station frequency has been stored in memory. The next time you press the same PRESET TUNING button the radio station frequency is recalled from memory. Notes • Up to 18 FM stations, 6 for each of the three FM bands, and 6 AM stations can be stored in memory. • You can also use 5 and ∞ to recall radio station frequencies assigned to PRESET TUNING buttons. Tuning in strong signals Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception. 1 Press LOCAL to turn local seek tuning on. Local seek sensitivity (LOC) appears in the display. 2 When you want to return to normal seek tuning, press LOCAL to turn local seek tuning off. Storing the strongest broadcast frequencies BSM (best stations memory) lets you automatically store the six strongest broadcast frequencies under PRESET TUNING buttons 1-6 and once stored there you can tune in to those frequencies with the touch of a button. Press and hold BSM for about two seconds to turn BSM on. BSM begins to flash. While BSM is flashing the six strongest broadcast frequencies will be stored under PRESET TUNING buttons in order of their signal strength. When finished, BSM stops flashing. • To cancel the storage process, press BSM. Note • Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using PRESET TUNING. Français Italiano Nederlands En 8