Pioneer KRP 500M Owner's Manual - Page 20

02 Install Your Flat Panel Display 2.6 Connect to Other Devices (DVR, Receiver, BDR, etc.) The type of equipment attached to your flat panel display determines which panel ports are used. The following sections explain how to connect equipment such as a DVD player, video recorder, etc. to the panel. If your equipment is not listed, please refer to the operating instructions that came with the device(s) for connection assistance. Connect a DVD player: Connect DVI equipment: Rear view Rear view RL Component video cable (commercially available) Audio cable (commercially available) Video cable (commercially available) Stereo sound cable RL with a mini plug (supplied) DVI-D cable (commercially available) RL Stereo mini cable (audio, commercially available) Conversion plug (ø 3.5 mm to ø 2.5 mm, commercially available) Stereo mini cable (commercially available) DVD player PC Use INPUT 2 terminals when connecting a DVD player or other audio/visual equipment. If your DVD player has an HDMI terminal, use this connection instead of making video connections. For details, refer to the operation manual that came with the DVD player. Use a DVI-D 24-pin (digital only) cable to connect a PC equipped with a DVI output terminal (digital RGB signal). After completing connections, follow the onscreen setup directions (page 56). INPUT 4 supports Microsoft "Plug & Play" (VESA DDC 2B) components. See "9.2 Video/PC Signals (HDMI/DVI/Component/min D-Sub/Composite)" for information about signals and display formats supported by INPUT 4. 20 En