Pioneer MVH-1400NEX Owners Manual - Page 89
Warning, Caution
View all Pioneer MVH-1400NEX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
English Menu Item [Automatic Level Control] [Off] [Mode1] [Mode2] [Sound Retriever] [Off] [Mode1] [Mode2] Description Corrects automatically the audio level difference between the music files or the sources. Turns the auto level control setting off. Corrects a little the audio level difference between the music files or the sources (for the narrow dynamic range audio signal). Corrects widely the audio level difference between the music files or the sources (for the wide dynamic range audio signal). Enhances compressed audio and restores rich sound automatically. TIP [Mode2] has a stronger effect than [Mode1]. *1 [All] is not available when [Network Mode] is selected as the speaker mode. *2 If you change the listening position setting, the output levels of all the speakers will change in conjunction with the setting. *3 To use this function, the vehicle's acoustics must be measured in advance. *4 This function is not available when adjusting the High speaker. *5 This function is available only when the listening position setting is set to [Front Left] or [Front Right]. Adjusting the equalizer curve automatically (Auto EQ) By measuring the vehicle's acoustics, the equalizer curve can be adjusted automatically to suit the vehicle interior. WARNING A loud tone (noise) may be emitted from the speakers when measuring the vehicle's acoustics. Never perform Auto EQ measurement while driving. CAUTION • Thoroughly check the conditions before performing Auto EQ as the speakers may be damaged if this is performed under the following conditions: - When the speakers are incorrectly connected. (For example, when a rear speaker is connected as a subwoofer output.) - When a speaker is connected to a power amp delivering output higher than the speaker's maximum input power capability. • If a microphone for acoustical measurement (sold separately) is not placed in the appropriate location, the measurement tone may become loud and measurement may take a long time, resulting in battery drainage. Be sure to place the microphone in the specified location. - 89 -