Pioneer P3500 Owner's Manual - Page 26
Introduction of audio, adjustments, Compensating for, equalizer curves EQ-EX, Audio Adjustments
UPC - 012562620541
View all Pioneer P3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Section HHHHHHHHHHHHHH 07 Audio Adjustments Introduction of audio adjustments 12 3 65 4 1 SFEQ indicator Appears in the display when SFEQ function can be activated. 2 Loudness indicator Appears in the display when loudness is turned on. 3 SW indicator Shows when the subwoofer output is turned on. 4 Audio display Shows the audio adjustments status. 5 EQ-EX indicator Appears in the display when EQ-EX function can be activated. 6 CUSTOM indicator Shows when custom equalizer curve is presently selected. % Press AUDIO to display the audio function names. Press AUDIO repeatedly to switch between the following audio functions: FAD (balance adjustment)EQ-L (equalizer curve adjustment)B (bass and treble level adjustment)LOUD (loudness)SUB, W (subwoofer on/off setting)/NOFAD (non fading output on/off setting)80: 0 (subwoofer setting)/NOFAD (non fading output setting) HPF (high pass filter)SLA (source level adjustment) # If EQ-EX function has been selected and only when EQ-EX is turned on and CUSTOM is selected as the equalizer curve, you can switch to B. # When the subwoofer controller setting is only P/O :FUL, you cannot switch to SUB, W. (Refer to page 34.) # You can select the 80: 0 only when subwoofer output is turned on in the SUB, W. # When the subwoofer controller setting is only P/O :FUL, you can switch to the non fading output on/off setting. (Refer to page 34.) # You can select the non fading output setting only when non fading output is turned on in the non fading output on/off setting. # When selecting the FM tuner as the source, you cannot switch to SLA. # To return to the display of each source, press BAND. Note If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display. Compensating for equalizer curves (EQ-EX) The EQ-EX compensates for each equalizer curve. Furthermore, you can adjust bass and treble for each source when CUSTOM curve is selected. ! If SFEQ has been previously selected, press EQ-EX and hold to switch to EQ-EX and EQ-EX appears in the display. % Press EQ-EX to turn EQ-EX on. EQ-EX:ON appears in the display. EQ-EX is now on. # To turn EQ-EX off, press EQ-EX. 26 En