Pioneer P5900DVD Other Manual - Page 3
When connecting with a multi-channel processor - car audio
UPC - 012562848563
View all Pioneer P5900DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Connecting the Units When connecting with a rear view camera When using this product with a rear view camera, automatic switching to video from a rear view camera when the gear shift is moved to REVERSE (R) position is possible. WARNING USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY RESULT IN INJURY OR DAMAGE. CAUTION • The screen image may appear reversed. • The rear view camera function is to be used as an aid for backing into a tight parking spot. Do not use this function for entertainment purposes. • Objects in the rear view may appear closer or more distant than they actually are. This product Rear view camera input (REAR VIEW CAMERA IN) CAUTION You must use a camera which outputs mirror reversed images. Rear view camera 20 cm (7-7/8 in.) RCA cable 10 cm (3-7/8 in.) (sold separately) Extension lead (supplied) Violet/white Fuse resistor Of the two lead wires connected to the back lamp, connect the one in which the voltage changes when the gear shift is in the REVERSE (R) position. This connection enables the unit to sense whether the car is moving forwards or backwards. To video output 8 m (26 ft. 3 in.) Connection method 1. Clamp the lead. 2. Clamp firmly with needle-nosed pliers. Note: • It is necessary to set CAMERA POLARITY properly in SYSTEM MENU when connecting the rear view camera. When connecting with a multi-channel processor 15 cm (5-7/8 in.) IP-BUS input (Blue) Blue 44 cm (1 ft. 5 in.) Blue AV-BUS input (Blue) AV-BUS cable (supplied with DVD player) IP-BUS cable (supplied with DVD player) This product DEQ output (SUBWOOFER OUTPUT or DEQ OUTPUT) Black Optical cable connection box (supplied with multi-channel processor) 20 cm (7-7/8 in.) Optical cable (supplied with multi-channel processor) RCA cable (supplied with multi-channel processor) Optical cable (sold separately) DVD player (e.g., XDV-P6) (sold separately) Blue Blue Black Hide-away unit (supplied with DVD player) Blue Black Black Black Multi-channel processor (e.g., DEQ-P8000) (sold separately) 25 pin cable (supplied with DVD player) Black Blue IP-BUS cable (supplied with TV tuner) IP-BUS cable IP-BUS cable (supplied with multi-channel processor) When you connect a separately sold DVD player to the separetely sold multi-channel processor, the optical cable from DVD player must be connected to the optical cable 2 input (OPT. IN2) of the multi-channel processor. Black Blue Hide-away TV tuner (e.g., GEX-P5700TV) (sold separately) Multi-CD player (sold separately) AV-BUS cable (supplied with TV tuner) Black Connecting and installing the optical cable connection box WARNING • Avoid installing this unit in locations where the operation of safety devices such as airbags is prevented by this unit. Otherwise, there is a danger of a fatal accident. • Avoid installing this unit in locations where the operation of the brake may be prevented. Otherwise, it may result in a traffic accident. • Fix this unit securely with the velcro tape or lock tie. If this unit is loose, it disturbs driving stability, which may result in a traffic accident. CAUTION • Install this unit using only the parts supplied with this unit. If other parts are used, this unit may be damaged or could dismount itself, which leads to an accident or other problems. • Do not install this unit near the doors where rainwater is likely to be spilled on the unit. Incursion of water into the unit may cause smoke or fire. Connecting the optical cable 1. Connect the optical cable and ground lead to the main unit. Connect the optical cable so that it does not protrude from the unit, as shown in the illustration. Fasten the ground lead to the protrusion on the back of the unit. Screw Optical cable Installing the optical cable connection box • When installing the optical cable connection box with the velcro tape. Install the optical cable connection box using the velcro tape in the ample space of the console box. Velcro tape (hard) Velcro tape (soft) • When installing the optical cable connection box with the lock tie. Wrap the optical cable and connection box with the protection tape and fasten with the power code using the lock tie. Wrap with the protection tape 2. Connect the optical cable to the optical cable connection box. Fasten with the lock tie ENGLISH When connecting the external video component and the display Rear monitor output (REAR MONITOR OUTPUT) 15 cm (5-7/8 in.) This product To video input Display with RCA input jacks (sold separately) Video input (VIDEO INPUT) 25 cm (9-7/8 in.) Audio input (AUDIO INPUT) RCA cables (sold separately) To video output External video component (sold separately) To audio outputs • It is necessary to set AV INPUT to VIDEO in SYSTEM MENU when connecting the external video component. • It is necessary to set AV INPUT to S-DVD in SYSTEM MENU when connecting a multi-DVD player. When using a display connected to rear video output This product's rear video output is for connection of a display to enable passengers in the rear seats to watch the DVD or Video CD. WARNING • NEVER install the display in a location that enables the Driver to watch the DVD or Video CD while driving.