Pioneer PRV-LX1 PRV-LX1 IEEE-1394 Command Protocol Manual - Page 3

Foreword, Function, Setup/Operation - remote

Get Pioneer PRV-LX1 PDF manuals and user guides View all Pioneer PRV-LX1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 3 highlights

1.0 Foreword The PRV-LX1 can be controlled externally using IEEE-1394 commands. Control is applied through the 4-pin connection located on the rear of the recorder. Set the IEEE-1394 REMOTE controls through the main menu. With a monitor connected to the PRV-LX1, press the Function button on the PRV-LX1's front panel to access the menu. Control Settings are accessed through the Setup/Operation menu. Note: This document is valid for PRV-LX1 System Version 3.01/1.04 or later. Note: The recorder's DV Recording must be set for Remote (under Status > Control Settings > Control) to have the unit recognize IEEE-1394 external control options (see image below).

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
1.0
Foreword
The PRV-LX1 can be controlled externally using IEEE-1394 commands.
Control is applied through the
4-pin connection located on the rear of the recorder.
Set the IEEE-1394 REMOTE controls through the
main menu.
With a monitor connected to the PRV-LX1, press the
Function
button on the PRV-LX1’s
front panel to access the menu.
Control Settings are accessed through the
Setup/Operation
menu.
Note: This document is valid for PRV-LX1 System Version 3.01/1.04 or later.
Note: The recorder’s DV Recording must be set for Remote (under Status > Control Settings > Control) to
have the unit recognize IEEE-1394 external control options (see image below).