Pioneer SC-1522 Operating Instructions - Page 99
MHL Setup
![]() |
View all Pioneer SC-1522 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
12 The System Setup and Other Setup menus The low frequency component output from the AUDIO ZONE 2 OUT terminals is cut. When a subwoofer is connected in Zone 2, we recommend setting this to "ON". This is only valid when Zone 2 is connected using the AUDIO ZONE 2 OUT terminals. ! OFF (default) - The High Pass Filter function is disabled. ! ON - The High Pass Filter function is enabled. 9 Select the TONE setting you want. This can only be set when ZONE 2 is selected in step 2. The bass and treble for ZONE 2 can be adjusted. When BYPASS is selected, the original sound is played as such. When ON is selected, the BASS and TREBLE can be adjusted. ! When the speaker terminals are being used for Zone 2, the TONE settings cannot be made. 10 Adjust the bass (BASS) and treble (TREBLE) to your tastes. This can only be set when ZONE 2 is selected in step 2 and ON is selected in step 8. The BASS and TREBLE can each be adjusted between -10.0dB and +10.0dB, in 1 dB steps. 11 When you're finished, press RETURN. You will return to the Other Setup menu. EXTENSION Setup ! Default setting: OFF A separately sold the CU-RF100 can be used to operate the receiver by RF communications. To do so, set the EXTENSION setting to ON. When ON is set here, the receiver can be operated even when the receiver is in the standby mode. 1 Select 'EXTENSION Setup' from the Other Setup menu. 2 Select the EXTENSION setting you want. 3 When you're finished, press RETURN. You will return to the Other Setup menu. On Screen Display Setup When the receiver is operated, its status (the input name, listening mode, etc.) is displayed superimposed over the video output on the display. This status display can be turned off by switching this setting to OFF. ! Default setting: ON 1 Select 'On Screen Display Setup' from the Other Setup menu. 2 Select the On Screen Display setting you want. 3 When you're finished, press RETURN. You will return to the Other Setup menu. MHL Setup Select whether or not to switch the input automatically to the MHL input when an MHL-compatible device is connected. ! Default setting: ON 1 Press on the remote control, then press HOME MENU. A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the screens and select menu items. Press RETURN to exit the current menu. ! Press HOME MENU at any time to exit the Home Menu. 2 Select 'System Setup' from the Home Menu, then press ENTER. 3 Select 'MHL Setup' from the System Setup menu. 4 Select the 'Auto input switching' setting you want. Note ! The on-screen display is not displayed for video outputs from the HDMI OUT 2 and VIDEO MONITOR OUT terminals. ! The on-screen display is not displayed when the video output resolution is 480i/576i or 4K. ! The size of the characters displayed differs according to the output resolution. Maintenance Mode Only use this if so instructed by a Pioneer service engineer or custom installer. 99
![](/manual_guide/products/pioneer-sc1522-operating-instructions-ea3a787/99.png)