Pioneer SC-LX704 Instruction Manual - Page 55

Contents ≫ Connections ≫ Playback ≫ Setup ≫ „„5.1 Channel System (Bi-Amping the Speakers) + ZONE SPEAKER MAIN ROOM    "Speaker Setup" settings during Initial Setup ( p201) Speaker Setup Height 1 Speaker Height 2 Speaker Zone Speaker Speaker B Zone 2 Preout 5.1 ch 1 ch ----- Zone 2 Zone 2 Front ZONE 2  For highfrequency For lowfrequency You can configure a 5.1 Channel System ( p19) by connecting front speakers that support Bi-Amping connection. The Bi-Amping connection can improve the quality of the low and high pitched ranges. Be sure to remove the jumper bar connecting between the woofer jacks and tweeter jacks of the Bi-Amping supported speakers. Refer to the instruction manual of your speakers as well. MAIN ROOM: This is a basic 5.1 Channel System. ZONE 2: You can enjoy 2-ch audio in the separate room (ZONE 2) while performing 5.1-ch playback in the main room (where this unit is located). The same source can be played back in the main room and ZONE 2 simultaneously. Also, different sources can be played back in both rooms. • Speaker Channels: 5.1 ch • Subwoofer: 1ch • Height 1 Speaker: --• Height 2 Speaker: --• Zone Speaker: Zone 2 • Speaker B: No • Zone 2 Preout: Set any value ( p160) • Bi-Amp: Front • Symmetry / All Channel Adjust / Front Align ( p201) Setup To output the video and audio of the HDMI input to ZONE 2, from the Home screen, set "System Setup" - "Input/Output Assign" "TV Out/OSD" - "Zone 2 HDMI" ( p154) to "Use". 55 Front Panel≫ Rear Panel≫ Remote≫