Pioneer SP-EC73 Owners Manual - Page 4
Bass Management Settings, Installation Precautions, Cabinet Maintenance
View all Pioneer SP-EC73 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
4 English www.pioneerelectronics.com BASS MANAGEMENT SETTINGS If you are using an A/V receiver or surround sound processor with your speakers, you will need to set the bass management appropriately. The SP-EC73 center speaker always be set to SMALL in the receiver's menu. This setting will ensure that no deep bass signals get into the speaker, which is too small to play deep bass tones loudly. These deep tones will not be lost, though-they will be reproduced either by your front left and right speakers or by your subwoofer. If your receiver or processor lets you set the crossover frequency for the SP-EC73, we recommend 80 Hz. CABINET MAINTENANCE • Use a polishing cloth or dry cloth to wipe off dust and dirt. • When the cabinet is very dirty, clean with a soft cloth dipped in some neutral cleanser diluted with six parts water to one part cleanser, and then wipe again with a dry cloth. Do not use furniture wax or cleaners. • Never use paint thinner, benzine, insecticide sprays and other chemicals on or near the cabinets, since these will corrode the surfaces INSTALLATION PRECAUTIONS • Do not install this speaker system near a stove or other heating appliance, or put it in a place exposed to the sun. Such locations may cause the cabinet to change color and the speaker system to break down. • Remember that the SP-EC73 is quite heavy, so it is dangerous to install it in high places such as on walls or pillars or in other unstable locations unless suitably secured in place. Pioneer will not be responsible for any accidents or damage that may result from improper installation.