Pioneer VSX-1022-K Owner's Manual - Page 63
Status messages, Descriptions - network standby
View all Pioneer VSX-1022-K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
10 Additional information About messages displayed when using network functions Refer to the following information when you come up with a status message while operating the Network functions. Status messages Descriptions Connection Down The selected category or Internet radio station cannot be accessed. File Format Error Cannot be played back for some reasons. Track Not Found The selected song has not been found anywhere on the network. Server Error The selected server cannot be accessed. Server Disconnected The server has been disconnected. Empty There are no files stored in the selected folder. License Error The license for the contents to be played back is invalid. Item Already Exists This is displayed when the file you have attempted to register in the Favorites folder has already been registered. Favorite List Full This is displayed when you have attempted to register a file in the Favorites folder but the Favorites folder is already full. Resetting the main unit Use this procedure to reset all the receiver's settings to the factory default. Use the front panel controls to do this. 1 Switch the receiver into standby. 2 While holding down BAND, press and hold STANDBY/ON for about two seconds. 3 When you see RESET? appear in the display, press AUTO SURROUND/STREAM DIRECT. OK? shows in the display. 4 Press ALC/STANDARD SURR to confirm. OK appears in the display to indicate that the receiver has been reset to the factory default settings. Important • If the Control with HDMI function is set to ON, you may not be able to reset the unit. In this case, reset either by turning OFF the Control with HDMI function, or by putting the unit into standby mode by turning off the power of all the connected devices, and resetting after the HDMI indicator on the front panel turns off. Cleaning the unit • Use a polishing cloth or dry cloth to wipe off dust and dirt. • When the surface is dirty, wipe with a soft cloth dipped in some neutral cleanser diluted five or six times with water, and wrung out well, and then wipe again with a dry cloth. Do not use furniture wax or cleansers. • Never use thinners, benzine, insecticide sprays or other chemicals on or near this unit, since these will corrode the surface. Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", "Surround EX", and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & DTS-HD and the Symbol together are registered trademarks & DTS-HD Master Audio is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. 63