Pioneer VSX-1023-K Owner's Manual - Page 22
Connecting an MHL-compatible device, Connecting an HDMI-equipped component to, the front panel input - blinking hdmi
View all Pioneer VSX-1023-K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
2 Connecting your equipment Connecting an MHL-compatible device An MHL-compatible mobile device can be connected to enjoy full-HD videos, high quality multi-channel audio, and photos etc., with charge the battery on the receiver. Use the MHL cable (sold separately) to connect the device. Connecting an HDMI-equipped component to the front panel input MHL-compatible device MHL cable (sold separately) Switch the receiver into standby then use the MHL cable (sold separately) to connect your MHL enabled device to the MHL terminal on the front panel of this receiver. • The MHL-compatible device is recharged whenever it is connected to this unit. (Recharging is enabled only when the unit's power is turned on.) • For instructions on playing the MHL-compatible device, see Playing an MHL-compatible device on page 30. Video camera (etc.) Plugging in the receiver Only plug in after you have connected all your components to this receiver, including the speakers. Plug the AC power cord into a convenient AC power outlet. CAUTION • Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Never make a knot in the cord or tie it with other cords. The power cords should be routed such that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest PIONEER authorized service center or your dealer for a replacement. • The receiver should be disconnected by removing the mains plug from the wall socket when not in regular use, e.g., when on vacation. Note • After this receiver is connected to an AC outlet, a 2 second to 10 second HDMI initialization process begins. You cannot carry out any operations during this process. The HDMI indicator in the front panel display blinks during this process, and you can turn on this receiver once it has stopped blinking. When you set the Control with HDMI to OFF, you can skip this process. For details about the Control with HDMI feature, see HDMI Setup on page 55. 4 7 62 22