Pioneer VSX-44 Owner's Manual - Page 55

7 Home Menu 5 Adjust the level of each channel using /. If you selected Manual, use / to switch speakers. The Auto setup will output test tones in the order shown onscreen: 2c . Channel Level Front L Center Front R Surround R Surr. Back R Surr. Back L Surround L Subwoofer 0dB [ 0dB ] [ 0dB ] [ 0dB 0dB ] [ 0dB ] Return Adjust the level of each speaker as the test tone is emitted. Note • If you are using a Sound Pressure Level (SPL) meter, take the readings from your main listening position and adjust the level of each speaker to 75 dB SPL (C-weighting/slow reading). • The subwoofer test tone is output at low volumes. You may need to adjust the level after testing with an actual soundtrack. 6 When you're finished, press RETURN. You return to the Manual SP Setup menu. Tip • You can change the channel levels at any time by press CH SEL and CH LEVEL +/- on the remote control. You can also press RECEIVER, then press CH SEL and use / to select the channel, and then use / to adjust the channel levels. Speaker Distance For good sound depth and separation from your system, you need to specify the distance of your speakers from the listening position. The receiver can then add the proper delay needed for effective surround sound. 1 Select 'Manual SP Setup' from the Home Menu. 2 Select 'Speaker Distance' from the Manual SP Setup menu. 2 . Manual SP Setup a . Speaker Setting b . X.Over c . Channel Level d . Speaker Distance Return 2d . Speaker Distance Front L Center Front R Surround R Surr. Back R Surr. Back L Surround L Subwoofer 10.0 ft [ 10.0 ft ] [ 10.0 ft ] [ 10.0 ft 10.0 ft ] [ 10.0 ft ] Return 3 Adjust the distance of each speaker using /. You can adjust the distance of each speaker in 0.1 feet increments. 4 When you're finished, press RETURN. You return to the Manual SP Setup menu. The Input Assign menu Assigns input function for analog audio input terminal and component video input terminal and component video input terminal. • For the assignment of the digital signal inputs, see Selecting the audio input signal on page 29. Analog Input ANALOG IN1 audio input terminal is assigned to CD under factory settings, but this can be changed to TV input. 1 Select 'Input Assign' from the Home Menu. 2 Select 'Analog Input' from the Input Assign menu. 3 . Input Assign a . Analog Input b . Component Input 3a . Analog Input Analog CD 4 9 61 Return Return 3 Select the desired input option for the ANALOG IN1 audio input terminal. 4 When you're finished, press RETURN. You return to the Input Assign menu. Note • When playing analog input audio, switch to the CD or TV input menu, press RECEIVER and press SIGNAL SEL several times to choose A (Analog). (see Selecting the audio input signal on page 29) Component Input COMPONENT VIDEO IN1 input terminal is assigned to DVD under factory settings, but this can be changed to SAT/CBL input. 1 Select 'Input Assign' from the Home Menu. 55