Pioneer VSX-50 Owner's Manual - Page 69

The System Setup and Other Setup menus 12 1 Select 'Wireless LAN Converter' from the Network Setup menu. 2 Make the wireless LAN converter settings as necessary. When making the connection settings of the wireless LAN converter and access point, select "Access Point Setting" and make the connection settings for the wireless LAN converter and access point following the instructions on the screen. If you want to set the wireless LAN converter's IP address, select "WLAN IP Address" and input the IP address. Checking the Network Information The setting status of the following networkrelated items can be checked. ! IP Address - Check the IP address of this receiver. ! MAC Address - Check the MAC address of this receiver. ! Friendly Name - Friendly Name on page 68 . ! SSID - Check the SSID of the access point connected with the wireless LAN converter (only when a wireless LAN converter is connected). 1 Press on the remote control, then press HOME MENU. A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the screens and select menu items. Press RETURN to exit the current menu. 2 Select 'Network Information' from the Home Menu. Display the setting status of the network-related items. The Other Setup menu The Other Setup menu is where you can make customized settings to reflect how you are using the receiver. 1 Press on the remote control, then press HOME MENU. A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the screens and select menu items. Press RETURN to exit the current menu. 2 Select 'System Setup' from the Home Menu. 3 Select 'Other Setup', then press ENTER. 4 Select the setting you want to adjust. If you are doing this for the first time, you may want to adjust these settings in order: ! Auto Power Down - Sets the power to turn off automatically when the receiver is not being used. ! Volume Setup - Sets up the volume-related operations of this receiver (page 69). ! Remote Control Mode Setup - Sets this receiver's remote control mode (page 69). ! Flicker Reduction Setup - Adjusts the way the GUI screen looks (page 70). ! Software Update - Use to update the receiver's software and check the version. ! Pairing Bluetooth Setup - Use to pair a Bluetooth ADAPTER and Bluetooth wireless technology device (page 34). 5 Make the adjustments necessary for each setting, pressing RETURN to confirm after each screen. Auto Power Down The power can be set to turn off automatically if no operation has been performed for a specific amount of time with no audio or video signals being input to the receiver. When using ZONE 2, the ZONE 2 power can also be set to turn off, but for ZONE 2 the power turns off automatically after the amount of time set here even if signals are being input or operations have been performed. Different times can be set for the main zone and ZONE 2. 1 Select 'Auto Power Down' from the Other Setup menu. 2 Select the zone you want to set and set the time after which the power turns off. ! MAIN - The time can be selected from among "15 min", "30 min", "60 min" and "OFF". The power turns off after there has been no signal and no operation for the selected time. ! ZONE 2 - The time can be selected from among "30 min", "1 hour", "3 hours", "6 hours", "9 hours" and "OFF". The power turns off after the selected time. Volume Setup You can set the maximum volume of this receiver or specify what the volume level will be when the power is turned on. 1 Select 'Volume Setup' from the Other Setup menu. 2 Select the Power ON Level setting you want. The volume can be set so that it is always set to the same level when the receiver's power is turned on. ! LAST (default) - When the power is turned on, the volume is set to the same level as when the power was last turned off. ! "---" - When the power is turned on, the volume is set to minimum level. ! -80.0dB to +12.0dB - Specify the volume to be set when the power is turned on, in steps of 0.5 dB. It is not possible to set a volume level greater than the value specified at Volume Limit setup (see below). 3 Select the Volume Limit setting you want. Use this function to limit the maximum volume. The volume cannot be increased above the level set here, even by operating MASTER VOLUME button (or the dial on the front panel). ! OFF (default) - The maximum volume is not limited. ! -20.0dB/-10.0dB/0.0dB - The maximum volume is limited to the value set here. 4 Select the Mute Level setting you want. This sets how much the volume is to be turned down when MUTE is pressed. ! FULL (default) - No sound. ! -40.0dB/-20.0dB - The volume will be turned down to the level specified here. 5 When you're finished, press RETURN. You will return to the Other Setup menu. Remote Control Mode Setup ! Default setting: 1 This sets this receiver's remote control mode to prevent erroneous operation when multiple units of the receiver are being used. 1 Select 'Remote Control Mode Setup' from the Other Setup menu. 2 Select the Remote Control Mode setting you want. 3 Select 'OK' to change the remote control mode. En 69