Pioneer VSX-824-K Owner's Manual - Page 47
Select 'Parental Lock' from the Network Configuration - update
View all Pioneer VSX-824-K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
6 Playback with NETWORK features Friendly Name 1 Select 'Network Configuration' from the Network Setup menu. 2 Select 'Friendly Name' from the Network Configuration menu. 3 Select 'Edit Name' then select 'Rename'. If after changing the name you want to restore the name to the default, select Default. 4 Input the name you want. Use / to select a character, / to set the position, and ENTER to confirm your selection. Parental Lock Set restrictions for using Internet services. Also set the password accompanying the usage restrictions. • Upon shipment from the factory, the password is set to "0000". 1 Select 'Network Configuration' from the Network Setup menu. 2 Select 'Parental Lock' from the Network Configuration menu. 3 Input the password. Use / to select a character, / to set the position, and ENTER to confirm your selection. 4 Specify whether to turn Parental Lock on or off. • OFF - Internet services are not restricted. • ON - Internet services are restricted. 5 If you want to change the password, select 'Change Password'. In this case, the procedure returns to step 3. Language Language can be set on the NETWORK function OSD screen. 1 Select 'Language' from the Network Setup menu. 2 Select the language you want. 3 When you're finished, press RETURN. You return to the Network Setup menu. Firmware Update Use this procedure to update the receiver's firmware. If an update file does not exist in the Pioneer's website, updating the firmware for the receiver is not necessary. Updating via a USB memory device is performed by downloading the update file from a computer, reading this file onto a USB memory device then inserting this USB memory device into the USB port on the receiver's front panel. With this procedure, the USB memory device containing the update file must first be inserted into the USB port on the receiver's front panel. • If an update file is provided on the Pioneer website, download it onto your computer. When downloading an update file from the Pioneer website onto your computer, the file will be in ZIP format. Unzip the ZIP file before saving it on the USB memory device. If there are any old downloaded files or downloaded files for other models on the USB memory device, delete them. Important • DO NOT unplug the power cord during updating. • Do not disconnect the USB memory device during updating. • Verify the firmware version of the receiver in the System Info menu before updating and confirm that the firmware in the USB memory device is a newer version. • Updating may reset the receiver's settings to the initial, factory-setting condition. Whether this is applicable to your receiver can be confirmed at our Pioneer website. 1 Select 'Firmware Update' from the Network Setup menu. The receiver checks whether the USB memory device inserted into the USB port on the receiver's front panel contains updatable firmware. 2 To update, select 'Start'. 3 When 'Updating in progress, don't unplug!' is displayed, select 'Start'. • If 'File Not Found' is displayed, try the following: - No update file was found on the USB memory device. Store the file in the USB memory device's root directory. - Try disconnecting then reconnecting the USB device or storing the update file again. If the error still occurs, try using a different USB memory device. 4 The firmware update will start. Please wait. The OSD display will turn off during update and the words 'UPDATE' will flash on the front panel. 5 Will automatically restart after update is completed. The screen will return automatically to the last selected function. • If 'FAIL' or 'SUB FAIL' is displayed on the front panel display, updating has failed. Try the following: - If 'SUB FAIL' is displayed, please wait for a while. Update will start automatically. If update does not resume or if 'SUB FAIL' is displayed again, try the following. - Turn the receiver's power off, then turn it back on and try updating the firmware again. - Try disconnecting then reconnecting the USB device or storing the update file again. If the error still occurs, try using a different USB memory device. 4 9 61 47