Pioneer VSX-935 Instruction Manual English

Pioneer VSX-935 Manual

Get Pioneer VSX-935 PDF manuals and user guides View all Pioneer VSX-935 manuals
Add to My Manuals
Save this manual to your list of manuals

Pioneer VSX-935 manual content summary:

  • Pioneer VSX-935 | Instruction Manual English - Page 1
    Instruction Manual En AV RECEIVER VSX-935
  • Pioneer VSX-935 | Instruction Manual English - Page 2
    Table of contents Speaker Layout Main Room Zone 2 Speaker Connections Firmware Update Troubleshooting Supplementary Information Reducing the Power Consumption in Standby State When the following functions are enabled, the power consumption in standby state increases. To reduce the
  • Pioneer VSX-935 | Instruction Manual English - Page 3
    Before starting the procedure Firmware Update Update Information of the firmware Firmware Update Procedure Part Names Front Panel Display Rear Panel (North American models) Rear Panel (European, A Australian and Asian models) Remote Controller Inputting Characters Speaker Layout The listening room
  • Pioneer VSX-935 | Instruction Manual English - Page 4
    Sonos on This Unit 89 Internet Radio 90 Playing Back 90 Multi-zone 92 Playing Back 93 Using PERSONAL PRESET 95 USB Storage Device 97 Supported Audio Formats 97 USB Storage Device Requirements 97 Playing music files saved on a USB storage device 98 Music Server 100
  • Pioneer VSX-935 | Instruction Manual English - Page 5
    Miscellaneous MCACC Menu operations Full Auto MCACC 101 Manual MCACC 103 MCACC Data Check 103 Network/Bluetooth App Main features Initial Setup Troubleshooting 128 Before starting the procedure 130 When the unit is operating erratically 130 Troubleshooting 131 132 133 134 134 135
  • Pioneer VSX-935 | Instruction Manual English - Page 6
    Appendix Speaker Layouts and Selectable Listening Modes 160 Input Formats and Selectable Listening Modes 163 Listening Mode Effects 167 Speaker combinations 171 General Specifications 173 6
  • Pioneer VSX-935 | Instruction Manual English - Page 7
    are added by updating firmware or the service providers terminate their services. Also, available services may differ depending on your area. • Australian and Asian models) (1) • Initial Setup Guide (1) * This document is an online instruction manual. This is not supplied with the product. 7
  • Pioneer VSX-935 | Instruction Manual English - Page 8
    Firmware Update This unit is equipped with a function to update the firmware via network or USB port when the firmware update is announced after purchase. This enables various functions to be added and operations to be improved. Depending on the manufacturing timing of the product, the firmware may
  • Pioneer VSX-935 | Instruction Manual English - Page 9
    and the router. This may solve the problem. If you are still unable to connect Check the server operation status with your Internet service provider. • Others: After removing the power storage device. The format of USB storage devices supports FAT16 or FAT32 file system format. - Media inserted
  • Pioneer VSX-935 | Instruction Manual English - Page 10
    4. Connect the USB storage device to the USB port of this unit. • If an AC adapter is supplied with the USB storage device, connect the AC adapter, and use it with a household outlet. • If the USB storage device has been partitioned, each section will be treated as an independent device. 5. Press .
  • Pioneer VSX-935 | Instruction Manual English - Page 11
    Part Names Front Panel 1. INPUT SELECTOR dial: Switch the input to be played. 2. DIMMER button: You can switch the display off or adjust the brightness of the display in three steps. 3. FL OFF indicator: This lights when you have pressed DIMMER repeatedly to turn the display off. 4. ZONE 2-ON/OFF
  • Pioneer VSX-935 | Instruction Manual English - Page 12
    Front Panel player, etc. using a stereo mini plug cable (ø1/8″/3.5 mm). 14. STANDBY/ON button 15. PHONES jack: Headphones with a standard plug (ø1/4"/6.3 mm) are connected. 16. SETUP MIC jack: Connect the supplied speaker setup microphone. ( →p131, p144) 17. TUNER button: Switches the input to be
  • Pioneer VSX-935 | Instruction Manual English - Page 13
    Display input is selected. 3. Lights according to the type of input digital audio signal and the listening mode. 4. Lights in the following conditions. RDS: Receiving RDS broadcasting. TUNED: Receiving DAB (European models)/AM (North American,Australian and Asian models)/ FM radio STEREO: Receiving
  • Pioneer VSX-935 | Instruction Manual English - Page 14
    Rear Panel (North American models) (Bi-AMP) 5. HDMI IN jacks: Transmit video signals and audio signals with an HDMI cable connected to an AV component. 6. NETWORK port: Connect to the network with an Ethernet cable. 7. USB port: Connect a USB storage device to play music files ( →p97). You can also
  • Pioneer VSX-935 | Instruction Manual English - Page 15
    American models) (Bi-AMP) 13. SPEAKERS terminals: Connect speakers with speaker cables. (North American models support banana plugs. Use a plug 4 mm in diameter. Y plug connection is not supported.) 9. SIGNAL GND terminal: Connect the ground wire of the turntable. 10. AUDIO IN jacks: Input AV
  • Pioneer VSX-935 | Instruction Manual English - Page 16
    Rear Panel (European, A Australian and Asian models) 3. HDMI OUT jacks: Transmit video signals and audio signals with an HDMI cable connected to a monitor such as a TV or projector. 4. Wireless antenna: Used for Wi-Fi connection or when using a BLUETOOTH enabled 90° 180° device. Adjust the
  • Pioneer VSX-935 | Instruction Manual English - Page 17
    Rear Panel (European, A Australian and Asian models) 13. SPEAKERS terminals: Connect speakers with speaker cables. (Y plug connection is not supported.) 9. SIGNAL GND terminal: Connect the ground wire of the turntable. 10. AUDIO IN jacks: Input AV component audio signals with an analog audio cable
  • Pioneer VSX-935 | Instruction Manual English - Page 18
    Remote Controller 1. STANDBY/ON button 2. PERSONAL PRESET 1/2/3 buttons: Registers the current setting conditions such as input selector, listening mode, etc. or call the registered settings. ( →p95) 3. Input selector buttons: Switches the input to be played. 4. Play buttons: Used for playback
  • Pioneer VSX-935 | Instruction Manual English - Page 19
    AM (North American, Australian and Asian models)/ FM/DAB (European models) radio stations. ( →p74) 21. MODE button: Switches between automatic tuning and manual tuning ( →p69) for AM (North American, Australian and Asian models)/ FM stations, and allows you to select the order for displaying DAB
  • Pioneer VSX-935 | Instruction Manual English - Page 20
    Inputting Characters You can input characters or symbols on the keyboard displayed on the TV screen such as when inputting a password for Wi-Fi Setup ( →p135) or naming a preset radio station ( →p121). 1. Select a character or symbol with the cursors / / / on the remote controller and press the
  • Pioneer VSX-935 | Instruction Manual English - Page 21
    Speaker Layout Speaker Layout This unit can be used in different ways, depending on the layout of the speakers you are installing. Select the speaker layout that suits the installation environment, then confirm the methods for installation and connection. ‰ Speaker layout ( →p23) ‰ Speaker
  • Pioneer VSX-935 | Instruction Manual English - Page 22
    The listening room and the speaker layout Speaker Layout 1. ZONE A Speakers The speaker system set up in the main room (where this unit is located). 2. ZONE 2 Speakers The 2 ch speaker system set up in a separate room (ZONE 2). This enables you to play the same source in the main room and the
  • Pioneer VSX-935 | Instruction Manual English - Page 23
    3.1 Channel System A 3.1 Channel System that combines front speakers with a center speaker and a subwoofer. Speaker Layout Basic system ( →p29) 3.1 ch + ZONE 2 ( →p29) 3.1 ch (Bi-Amping (Front)) ( →p29) Main Room Zone 2 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.2ch 23
  • Pioneer VSX-935 | Instruction Manual English - Page 24
    5.1 Channel System This is a basic 5.1 Channel System. Basic system ( →p29) 5.1 ch + ZONE 2 ( →p29) Main Room Speaker Layout 5.1 ch (Bi-Amping (Front)) ( →p29) Zone 2 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.2ch 24
  • Pioneer VSX-935 | Instruction Manual English - Page 25
    Speaker Layout 7.1 Channel System This is a 7.1 Channel System that consists of the basic 5.1 Channel System and added surround back speakers. Basic system ( →p30) 7.1 ch + ZONE 2 (North American models) ( →p30) Main Room Zone 2 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.2ch 25
  • Pioneer VSX-935 | Instruction Manual English - Page 26
    3.1.2 Channel System A Speaker System that is a 3.1 Channel System with one set of height speakers added. Speaker Layout 3.1.2 ch (Front High or Rear High) ( →p31) 3.1.2 ch (Top Front or Top Middle or Top Rear) ( →p31) 3.1.2 ch (Dolby Enabled Speakers (Front)) ( →p31) 3.1.2 ch + ZONE 2 ( →p31)
  • Pioneer VSX-935 | Instruction Manual English - Page 27
    5.1.2 Channel System A Speaker System that is a 5.1 Channel System with one set of height speakers added. Speaker Layout 5.1.2 ch (Front High or Rear High) ( →p32) 5.1.2 ch (Top Front or Top Middle or Top Rear) ( →p32) 5.1.2 ch (Dolby Enabled Speakers (Front or Surround)) ( →p32) 5.1.2 ch +
  • Pioneer VSX-935 | Instruction Manual English - Page 28
    Speaker Installation Speaker Installation How the speakers are set up depends on the size and shape of the room, so here we introduce just a basic layout example. The alphabetic symbols used in this chapter represent the following speakers: FL FR C SW SL SR SBL SBR FHL FHR RHL RHR TFL TFR TML TMR
  • Pioneer VSX-935 | Instruction Manual English - Page 29
    „ 3.1 Channel System FL SW C FR a Speaker Installation „ 5.1 Channel System FL SW C a b SL FR SR FL, FR C SW a: 22° to 30° Place the Left and Right Front Speakers to match ear height. The center speaker should be set up facing the listening position at an angle. Place the powered
  • Pioneer VSX-935 | Instruction Manual English - Page 30
    „ 7.1 Channel System FL SW C a b SL c FR SR SBL SBR a: 22° to 30°, b: 90° to 110°, c: 135° to 150° FL, FR Place the Left and Right Front Speakers to match ear height. C The center speaker should be set up facing the listening position at an angle. SW Place the powered subwoofer between
  • Pioneer VSX-935 | Instruction Manual English - Page 31
    „ 3.1.2 Channel System High Speakers 3´ (0.9 m) or more FHL FHR a a: 22° to 30° RHL RHR 3´ (0.9 m) or more FHL, FHR Place the front high speakers directly above the front speakers, angled to face the listening position. RHL, RHR Place the rear high speakers so the lateral distance matches
  • Pioneer VSX-935 | Instruction Manual English - Page 32
    „ 5.1.2 Channel System High Speakers 3´ (0.9 m) or more FHL FHR a b RHL RHR a: 22° to 30° b: 120° 3´ (0.9 m) or more FHL, FHR Place the front high speakers directly above the front speakers, angled to face the listening position. RHL, RHR Place the rear high speakers so the lateral distance
  • Pioneer VSX-935 | Instruction Manual English - Page 33
    Speaker Connections Speaker Connections (Before starting the procedure) Speakers you can use with this unit and cable connections 34 4-16Ω 3.1 Channel System 5.1 Channel System 7.1 Channel System 3.1.2 Channel System 5.1.2 Channel System 36, 37, 38, 39 40, 41, 42, 43 44, 45 46, 47, 48, 49 50,
  • Pioneer VSX-935 | Instruction Manual English - Page 34
    with this unit and cable connections Speaker Connections „ Speakers you can use with this unit This unit supports speakers with 4 Ω to 16 Ω impedance. For speaker impedance, check the speaker instruction manual. „ (Note) Speaker Impedance If any of the speakers to be connected has an impedance of
  • Pioneer VSX-935 | Instruction Manual English - Page 35
    „ Connect the Subwoofer a a Subwoofer cable Connect a powered subwoofer with this unit using a subwoofer cable. Up to two powered subwoofers can be connected. The same signal is output from each SUBWOOFER PRE OUT jack. Speaker Connections 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.2ch 35
  • Pioneer VSX-935 | Instruction Manual English - Page 36
    „ 3.1 Channel System FL SW C FR Speaker Connections SW FR FL C 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.2ch 36
  • Pioneer VSX-935 | Instruction Manual English - Page 37
    „ 3.1 Channel System + ZONE SPEAKER (North American models) MAIN ROOM FL SW C FR Speaker Connections ZONE 2 FL(Z2) FR(Z2) SW FR FL C FR(Z2) FL(Z2) 3.1ch 5.1ch 7.1ch ‰ 3.1 Channel System ʴ ZONE SPEAKER 3.1.2ch (European, Australian and Asian models) ( p38) 5.1.2ch 37
  • Pioneer VSX-935 | Instruction Manual English - Page 38
    Speaker Connections „ 3.1 Channel System + ZONE SPEAKER (European, Australian and Asian models) MAIN ROOM FL SW C FR ZONE 2 FL(Z2) FR(Z2) SW FR FL C FR(Z2) FL(Z2) 38
  • Pioneer VSX-935 | Instruction Manual English - Page 39
    For low- SW FR frequency FL C Be sure to remove the jumper bar connecting between the woofer jacks and tweeter jacks of the Bi-Amping supported speakers. Refer to the instruction manual of your speakers as well. 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.2ch 39
  • Pioneer VSX-935 | Instruction Manual English - Page 40
    „ 5.1 Channel System FL SW C FR SL SR Speaker Connections SW FR FL C SR SL 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.2ch 40
  • Pioneer VSX-935 | Instruction Manual English - Page 41
    „ 5.1 Channel System + ZONE SPEAKER (North American models) MAIN ROOM FL SW C FR SL SR Speaker Connections ZONE 2 FL(Z2) FR(Z2) SW FR FL C SR SL FR(Z2) FL(Z2) ‰ 5.1 Channel System ʴ ZONE SPEAKER (European, Australian and Asian models) ( p42) 41
  • Pioneer VSX-935 | Instruction Manual English - Page 42
    Speaker Connections „ 5.1 Channel System + ZONE SPEAKER (European, Australian and Asian models) MAIN ROOM FL SW C FR SL SR ZONE 2 FL(Z2) FR(Z2) SW FR FL C SR SL FR(Z2) FL(Z2) 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.2ch 42
  • Pioneer VSX-935 | Instruction Manual English - Page 43
    - SW FR frequency FL C SR SL Be sure to remove the jumper bar connecting between the woofer jacks and tweeter jacks of the Bi-Amping supported speakers. Refer to the instruction manual of your speakers as well. 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.2ch 43
  • Pioneer VSX-935 | Instruction Manual English - Page 44
    „ 7.1 Channel System FL SW C FR SL SR SBL SBR Speaker Connections SW FR FL C SR SL SBR SBL 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.2ch 44
  • Pioneer VSX-935 | Instruction Manual English - Page 45
    Speaker Connections „ 7.1 Channel System + ZONE SPEAKER (For North American models only) FL SW C FR SL SR SBL SBR SW FR FL C SR SL SBR SBL FR(Z2) FL(Z2) While ZONE 2 playback is being performed, surround back speakers installed in the main room cannot play audio. 45
  • Pioneer VSX-935 | Instruction Manual English - Page 46
    „ 3.1.2 Channel System HL HR FL SW C FR Speaker Connections SW FR FL C OR OR OR OR HR HL *1 *1 Connect the Height Speakers you have actually installed (HL/HR: Height Speakers, Top Speakers, Dolby Enabled Speakers). 46
  • Pioneer VSX-935 | Instruction Manual English - Page 47
    „ 3.1.2 Channel System + ZONE SPEAKER (North American models) MAIN ROOM HL HR FL SW C FR Speaker Connections ZONE 2 FL(Z2) FR(Z2) SW FR FL C OR OR FR(Z2) FL(Z2) OR OR *1 Connect the Height Speakers you have actually installed (HL/HR: Height Speakers, Top Speakers, Dolby Enabled
  • Pioneer VSX-935 | Instruction Manual English - Page 48
    Speaker Connections „ 3.1.2 Channel System + ZONE SPEAKER (European, Australian and Asian models) MAIN ROOM HL HR FL SW C FR ZONE 2 FL(Z2) FR(Z2) SW FR FL C OR OR FR(Z2) FL(Z2) OR OR HR HL *1 *1 Connect the Height Speakers you have actually installed (HL/HR: Height Speakers, Top
  • Pioneer VSX-935 | Instruction Manual English - Page 49
    1ch HR HL *1 Be sure to remove the jumper bar connecting between the woofer jacks and tweeter jacks of the Bi-Amping supported speakers. Refer to the instruction manual of your speakers as well. *1 Connect the Height Speakers you have actually installed (HL/HR: Height Speakers, Top Speakers, Dolby
  • Pioneer VSX-935 | Instruction Manual English - Page 50
    „ 5.1.2 Channel System HL HR FL SW C FR SL SR Speaker Connections SW FR FL C SR SL OR OR OR OR HR HL *1 *1 Connect the Height Speakers you have actually installed (HL/HR: Height Speakers, Top Speakers, Dolby Enabled Speakers). 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.2ch 50
  • Pioneer VSX-935 | Instruction Manual English - Page 51
    Speaker Connections „ 5.1.2 Channel System + ZONE SPEAKER (For North American models only) HL HR FL SW C FR SL SR SW FR FL C SR SL OR OR FR(Z2) FL(Z2) OR OR HR HL *1 While ZONE 2 playback is being performed, height speakers installed in the main room cannot play audio. *1 Connect the
  • Pioneer VSX-935 | Instruction Manual English - Page 52
    Connections Connections Notes regarding connections with HDMI cables 53 Connecting the TV 54 Connecting the SUB Monitor 55 Connecting Playback Devices 56 Connecting a TV or Integrated Amplifier in a separate room (Multi-zone) 58 Connecting Antennas 60 Network Connection 61
  • Pioneer VSX-935 | Instruction Manual English - Page 53
    Connections Notes regarding connections with HDMI cables HDMI (High-Definition Multimedia Interface) is a digital interface standard for connecting TVs, projectors, Blu-ray Disc players, game consoles, and other video components. With HDMI, a single cable can carry control signals, digital video,
  • Pioneer VSX-935 | Instruction Manual English - Page 54
    the TV via an HDMI cable, and plays the audio of the TV on this unit. To check if the TV supports the ARC function and eARC function, refer to the instruction manual of the TV, etc. ARC/eARC compatible audio formats ( →p175) • Settings are required when 4K or 8K high-quality video
  • Pioneer VSX-935 | Instruction Manual English - Page 55
    Connecting the SUB Monitor Connections SUB Monitor This unit has multiple HDMI OUT jacks, and another TV or projector can be connected to the HDMI OUT SUB jack. • Switch between MAIN and SUB using the HDMI MAIN/SUB button on the remote controller ( →p18) or "AV Adjust" ( →p77). Note that this jack
  • Pioneer VSX-935 | Instruction Manual English - Page 56
    is to be played. Refer to "HDMI 4K/8K Signal Format" ( →p111) for information on the settings. Also, use an HDMI cable that supports 4K or 8K video. • The corresponding resolution is different depending on the HDMI jack connected. See "Corresponding input resolutions" ( →p176) for details. Note
  • Pioneer VSX-935 | Instruction Manual English - Page 57
    Connecting an Audio Component Connections This is a connection example of an audio component. Connect a CD player using a digital coaxial cable or analog audio cable. You can also connect a turntable that has an MM-type cartridge to the PHONO jack. • If the turntable has a built-in phono equalizer,
  • Pioneer VSX-935 | Instruction Manual English - Page 58
    Connections Connecting a TV or Integrated Amplifier in a separate room (Multi-zone) Connecting a TV (ZONE 2) While a disc is played on a Blu-ray Disc player in the main room (where this unit is located), you can play the video and audio of the same Blu-ray Disc player or another AV component on
  • Pioneer VSX-935 | Instruction Manual English - Page 59
    Connecting an Integrated Amplifier (ZONE 2) Connections You can enjoy 2 ch audio in the separate room (ZONE 2) while performing playback in the main room (where this unit is located). Use an analog audio cable to connect the ZONE 2 LINE OUT terminal on this unit to the input jack on an integrated
  • Pioneer VSX-935 | Instruction Manual English - Page 60
    Connecting Antennas (North American, Australian and Asian models) AM a (Australian and Asian models) (European models) DAB FM c b (North American models) AB c a AM loop antenna, b DAB/FM antenna, c Indoor FM antenna Connections North American, Australian and Asian models Connect the antenna
  • Pioneer VSX-935 | Instruction Manual English - Page 61
    To connect by Wi-Fi, select your desired setting method in "Network Connection" ( →p143) of Initial Setup, and then follow the on-screen instructions. To set in the System Setup menu after completing Initial Setup, press on the remote controller, then from the Home screen displayed, set in "Network
  • Pioneer VSX-935 | Instruction Manual English - Page 62
    Connecting the Power Cord Connections Connect the power cord after all the connections are completed. a a Power cord 62
  • Pioneer VSX-935 | Instruction Manual English - Page 63
    Playing audio from an externally connected device 64 BLUETOOTH® Playback 65 Listening To the Radio 69 Listening Mode 75 AV Adjust 77 Network Services Spotify 79 AirPlay® 80 DTS Play-Fi® 82 Amazon Alexa 83 Amazon Music 85 TIDAL 87 Connecting the Sonos System for Playback 88
  • Pioneer VSX-935 | Instruction Manual English - Page 64
    Playback Playing audio from an externally connected device You can play the audio from AV components, such as Blu-ray disc players through this unit. • When a TV is connected to the HDMI OUT SUB jack, use the HDMI MAIN/SUB button or "AV Adjust" ( →p77) to switch between MAIN and SUB. Basic
  • Pioneer VSX-935 | Instruction Manual English - Page 65
    Playback BLUETOOTH® Playback You can wirelessly play music on a smartphone or other BLUETOOTH wireless technology enabled device through the speakers connected to this unit. It is also possible to transmit the audio from this unit to BLUETOOTH enabled headphones, wireless speakers, etc. Playing
  • Pioneer VSX-935 | Instruction Manual English - Page 66
    • Due to the characteristics of BLUETOOTH wireless technology, the sound produced on this unit may slightly be behind the sound played on the BLUETOOTH enabled device. 66
  • Pioneer VSX-935 | Instruction Manual English - Page 67
    ENTER the message "Now Pairing..." is displayed and the two are paired. • Depending on the BLUETOOTH wireless technology enabled device, you may need to pair manually. If the device name does not appear in the list, check the settings of the BLUETOOTH wireless technology enabled device. 67
  • Pioneer VSX-935 | Instruction Manual English - Page 68
    technology enabled device in the following cases: - When the audio file is DSD format - When playing audio from one of the following network services: Chromecast built-in, Amazon Alexa, AirPlay, DTS Play-Fi • It is not possible to output the audio from Spotify from a BLUETOOTH wireless technology
  • Pioneer VSX-935 | Instruction Manual English - Page 69
    an FM radio station, the "STEREO" indicator lights up. When FM broadcasts reception is poor: Perform the procedure for "Tuning Manually" ( →p70). Note that if you tune manually, the reception for FM broadcasts will be monaural rather than stereo, irrespective of the sensitivity of the reception. 69
  • Pioneer VSX-935 | Instruction Manual English - Page 70
    of the sensitivity of the reception. 1. Press TUNER repeatedly to select either "AM" or "FM". 2. Press MODE repeatedly to display "TunMode: Manual" on the display. 3. While pressing the cursors / , select the desired radio station. • Each time you press the cursors / , the frequency changes
  • Pioneer VSX-935 | Instruction Manual English - Page 71
    3. When a station is found, the station blinks on the display. Pressing the ENTER button in this state will receive that station. If you don't press the ENTER button, the unit starts to search for another station. • If no stations are found, the message "Not Found" is displayed. • Unusual characters
  • Pioneer VSX-935 | Instruction Manual English - Page 72
    Listening To DAB Digital Radio (European models only) Playback Tuning into a Radio Station Perform the following procedure when this unit is on. 1. Press TUNER repeatedly to select "DAB". • The very first time you select DAB, the Auto Tuning function automatically scans the DAB Band 3 for the
  • Pioneer VSX-935 | Instruction Manual English - Page 73
    „ Changing the order stations are displayed You can sort the available stations alphabetically or by multiplex. 1. Press MODE repeatedly to set the method for sorting the display order from the following. Alphabet (default setting): Sort stations alphabetically. Multiplex: Sort stations by multiplex
  • Pioneer VSX-935 | Instruction Manual English - Page 74
    Presetting a Radio Station „ Registration Procedure You can preset up to 40(*) of your favorite radio stations. (*)North American,Australian and Asian models: AM and FM stations European models: FM and DAB stations After tuning in to the radio station you want to register, perform the following
  • Pioneer VSX-935 | Instruction Manual English - Page 75
    Playback Listening Mode You can change the listening mode during play by pressing repeatedly "AUTO/DIRECT", "SURR", or "STEREO". • For details of the effects of each listening mode, refer to "Listening Mode Effects" ( →p167). • For listening modes selectable for each audio format of input signals,
  • Pioneer VSX-935 | Instruction Manual English - Page 76
    „ SURR button By pressing repeatedly you can select the audio format of the signals being input and switch between a variety of listening modes. Select the mode that suits your preference. The selected listening mode is displayed on the display. Playback Checking the input format and listening mode
  • Pioneer VSX-935 | Instruction Manual English - Page 77
    AV Adjust Menu operations Playback You can quickly adjust the settings you frequently use, such as tone adjustments, etc. You can make the settings on the TV screen while playing something. Press on the remote controller to display the AV Adjust menu. Note that there is no display on the TV screen
  • Pioneer VSX-935 | Instruction Manual English - Page 78
    the acoustic environment of the room. • It cannot be set if the listening mode is Pure Direct. Manual EQ Select: From the Home screen, select "Preset 1" to "Preset 3" which were set in "MCACC" - "Manual MCACC" - "EQ Adjust". The same sound field setting is applied all ranges when set to "Off". • It
  • Pioneer VSX-935 | Instruction Manual English - Page 79
    Spotify Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to learn how. Playback 79
  • Pioneer VSX-935 | Instruction Manual English - Page 80
    For details, refer to the operating instructions for the iOS device. Basic Operations screen of the music app on an iOS device that supports AirPlay and select this unit from the list of Network Standby" is set to "Off " in the Home, manually turn the unit on and then press NET on the remote
  • Pioneer VSX-935 | Instruction Manual English - Page 81
    the right side. • Multiple AirPlay2-supported devices can be selected. • The volume can be adjusted on individual devices. 3. Play the music file on the iOS device. • If "System Setup" - "Hardware" - "Power Management" - "Network Standby" is set to "Off " in the Home, manually turn the unit on and
  • Pioneer VSX-935 | Instruction Manual English - Page 82
    service is displayed. Select the content to play, and perform operation according to the on-screen instructions. • If "System Setup" - "Hardware" - "Power Management" - "Network Standby" is set to "Off " in the Home, manually service, user registration may be required. • This unit does not support
  • Pioneer VSX-935 | Instruction Manual English - Page 83
    , but rather a screen prompting installation of Service Unlocker, then install that first. Available services may differ depending on your area. 4. Next" to display the Amazon Alexa screen. 6. Follow the on screen instructions to enter the Amazon account information, such as your email address and
  • Pioneer VSX-935 | Instruction Manual English - Page 84
    7. When registration is finished, the screen returns to the one for Pioneer Remote App. Follow the on screen instructions and talk to the terminal with Amazon Alexa (an Amazon Echo, etc.), and confirm that you can use voice commands. For example: "Alexa, raise the
  • Pioneer VSX-935 | Instruction Manual English - Page 85
    icon names may be different.) • If the login screen is not displayed, but rather a screen prompting installation of Service Unlocker, then install that first. Available services may differ depending on your area. 4. Enter the information required for the Amazon account, such as your email address
  • Pioneer VSX-935 | Instruction Manual English - Page 86
    Playing Amazon Music using the Pioneer Remote App 1. Start the Pioneer Remote App. This unit is displayed automatically when the app is started, so tap the unit when displayed to select it. 2. Tap "NET" or "NETWORK" at the top of the screen, and after switching to the network screen, tap the "Amazon
  • Pioneer VSX-935 | Instruction Manual English - Page 87
    onscreen instructions. Playback Registering this unit with TIDAL allows you to enjoy the music distribution service provided by is displayed instead, perform the update or installation according to the Available services may differ depending on your area. 6. Enter the TIDAL account information
  • Pioneer VSX-935 | Instruction Manual English - Page 88
    Power Management" - "Network Standby" is set to "Off " in the Home, manually turn the unit on and then press NET on the remote controller. In the You can also connect with a digital cable. For details, refer to the instruction manual of the Sonos. • You can rename the input that is displayed on
  • Pioneer VSX-935 | Instruction Manual English - Page 89
    Sonos Connect. • Up to 32 devices can be displayed on the Sonos product list screen. If you cannot find the Sonos Connect to be interlocked, return to the previous screen, turn off the product you do not want to interlock, and try again. Output Zone: With the cursors / , select the ZONE where you
  • Pioneer VSX-935 | Instruction Manual English - Page 90
    NET will display the Network Functions list screen on the TV. 3. Select your preferred Internet radio service using cursor, and press ENTER to confirm the selection. 4. Following the on-screen instructions, select a radio station and program using cursor, and then press ENTER to play. • To return to
  • Pioneer VSX-935 | Instruction Manual English - Page 91
    Menu You can bookmark specific stations, or delete stations that have been bookmarked. The displayed menu varies according to the service being selected. The menu icon is displayed while a station is being played. When only this icon is displayed, pressing ENTER will display the menu on
  • Pioneer VSX-935 | Instruction Manual English - Page 92
    Playback Multi-zone You can enjoy 2 ch audio in the separate room (ZONE 2) while performing playback in the main room (where this unit is located). The same source can be played back in the main room and ZONE 2 simultaneously. Also, different sources can be played back in both rooms. For the "NET",
  • Pioneer VSX-935 | Instruction Manual English - Page 93
    Playing Back 2 1 Playback In the remote controller operation, while pressing and holding the ZONE 2 SHIFT button on the remote controller, operate with each button. 1. Point the remote controller at the unit, and while pressing and holding the ZONE 2 SHIFT button on the remote controller, press . •
  • Pioneer VSX-935 | Instruction Manual English - Page 94
    To set the function to off: While pressing and holding ZONE 2 SHIFT button, press . Alternatively, press the ZONE 2-ON/OFF button on the main unit. Playback 94
  • Pioneer VSX-935 | Instruction Manual English - Page 95
    Using PERSONAL PRESET Playback Registration You can register settings ( →p96) such as the current input selector and listening mode with the three PERSONAL PRESET buttons, and call a registered setting in a single operation. e.g.) Pressing the PERSONAL PRESET button will automatically switch the
  • Pioneer VSX-935 | Instruction Manual English - Page 96
    Settings that can be registered The following settings can be registered with PERSONAL PRESET. - Input selector (Network service or AM (North American,Australian and Asian models)/FM/DAB (European models) radio stations can also be registered.) - Output destination (HDMI) - Listening mode - Volume
  • Pioneer VSX-935 | Instruction Manual English - Page 97
    Between 5 kbps and 320 kbps, and VBR • WMA Pro/Voice/WMA Lossless formats are not supported. WAV (.wav) WAV files contain uncompressed PCM digital audio. • 44.1 kHz, 48 kHz mass storage class standard. Also the format of USB storage devices supports FAT16 or FAT32 file system format. • If the USB
  • Pioneer VSX-935 | Instruction Manual English - Page 98
    Playing music files saved on a USB storage device Playback USB Front Perform the following procedure when this unit is on. 1. Switch the input on the TV to the input connected to the unit. 2. Plug your USB storage device with the music files into the USB port either on the front panel or rear
  • Pioneer VSX-935 | Instruction Manual English - Page 99
    may not be displayed correctly. • This unit supports the gapless playback of the USB storage device in the following conditions. When continuously playing WAV, FLAC and Apple Lossless files with the same format,
  • Pioneer VSX-935 | Instruction Manual English - Page 100
    registered in the library of Windows Media® Player can be played. Supported Audio Formats Windows Media® Player 12 settings MP3 (.mp3) • kbps and 320 kbps, and VBR • WMA Pro/Voice/WMA Lossless formats are not supported. WAV (.wav) WAV files contain uncompressed PCM digital audio. • 44.1 kHz, 48
  • Pioneer VSX-935 | Instruction Manual English - Page 101
    play. 3. Make sure that the PCs and/or NASs are properly connected to the same network as this unit. 4. Press NET to display the network service list screen. • If the "NET" indicator on the display blinks, the unit is not properly connected to the network. Check the connection. TV Network 5. With
  • Pioneer VSX-935 | Instruction Manual English - Page 102
    correctly. • For music files on a server, up to 20,000 tracks per folder are supported, and folders can be nested up to 16 levels deep. • Depending on the type of in the following conditions. - It is using a network service. - It is playing a music file on a USB storage device. • Remote play of FLAC and
  • Pioneer VSX-935 | Instruction Manual English - Page 103
    Play Queue list, only "Play Now " is displayed. Sort and Delete 1. Select the "NET" input, tap the "Play Queue" icon, and enter the Play Queue service screen. 103
  • Pioneer VSX-935 | Instruction Manual English - Page 104
    track from Play Queue. Playing Back Playback starts when you select "Play Now " for Play Queue addition, or select the track in the Play Queue service screen. Playback 104
  • Pioneer VSX-935 | Instruction Manual English - Page 105
    Playback Connecting a transmitter for playback When you connect wireless headphones or a wireless speaker transmitter to the ZONE B LINE OUT terminal of this unit, you can play back the same source through the wireless headphones or wireless speakers as in the main room. Connections Setting Up
  • Pioneer VSX-935 | Instruction Manual English - Page 106
    When using a speaker layout of 3.1 ch or more, you can select only the "Ext. Stereo" listening mode. Playback 106
  • Pioneer VSX-935 | Instruction Manual English - Page 107
    Setup System Setup MCACC Network/Bluetooth Web Setup Initial Setup with Auto Start-up Wizard Pioneer Remote App Setup 108 130 134 141 142 145 107
  • Pioneer VSX-935 | Instruction Manual English - Page 108
    System Setup Use the on-screen displays (OSD) that appear on the TV to make the settings. Press on the remote controller to display the Home screen, then select System Setup with the cursors on the remote controller and press ENTER. Select the item with the cursor / / / buttons of the remote
  • Pioneer VSX-935 | Instruction Manual English - Page 109
    Source Hardware Multi Zone Miscellaneous Input Volume Absorber Name Edit Audio Select Adjust the volume level when there are differences in volume level among multiple devices connected to this unit. Set an easy name for each input. Select the priority for input selection when multiple audio
  • Pioneer VSX-935 | Instruction Manual English - Page 110
    resolution of the video signals input from the AV component. Off Auto When this function is not used • Select "Off" if your TV does not support 4K/8K. When this function is used ‰ Super Resolution (Default Value: 2) When you have set "Upscaling" to "Auto", you can select the degree of video
  • Pioneer VSX-935 | Instruction Manual English - Page 111
    disruption depending on the connected component and the HDMI cable. If this occurs, switch to "4K Standard". When using a PREMIUM High Speed HDMI Cable that supports 18 Gbps to connect a TV or player compatible with 4K 120Hz, 5K 30Hz, or 8K 30Hz signal formats When using an ULTRA High Speed HDMI
  • Pioneer VSX-935 | Instruction Manual English - Page 112
    Value: ---) CD (Default Value: COAXIAL) TV (Default Value: OPTICAL) COAXIAL, OPTICAL Assign the COAXIAL terminal or OPTICAL terminal to any input selector. • Supported sampling rates for PCM signals (stereo, mono) from a digital input are 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz/16 bit
  • Pioneer VSX-935 | Instruction Manual English - Page 113
    Input/Output Assign „ Analog Audio Input Change input assignment between the input selectors and AUDIO IN jacks. If you do not assign a jack, select "---". ‰ BD/DVD (Default Value: AUDIO 1) GAME (Default Value: ---) CBL/SAT (Default Value: AUDIO 2) STRM BOX (Default Value: AUDIO 3) CD (
  • Pioneer VSX-935 | Instruction Manual English - Page 114
    displayed only when the input selector is set to "TUNER". • "Station" is displayed only when the input selector is set to "TUNER" or "NET". • "Network Service" is displayed only when the input selector is set to "NET". • Preset Name of "Band/Station" (only when the input selector is set to "TUNER
  • Pioneer VSX-935 | Instruction Manual English - Page 115
    ohms or above) Set the impedance (Ω) of the connected speakers. • For impedance, check the indications on the back of the speakers or their instruction manual. 4ohms 6 ohms or above When any of the connected speakers have 4 Ω or more to less than 6 Ω impedance When the connected speakers all have
  • Pioneer VSX-935 | Instruction Manual English - Page 116
    "Front" will be fixed to "Large" and the low pitched range of the other channels will be output from the front speakers. Refer to the instruction manual of your speakers to make the setting. Center, Height, Surround: Set according to the speakers to be used. "Small": When speaker where the speaker
  • Pioneer VSX-935 | Instruction Manual English - Page 117
    Speaker „ Distance Set the distance from each speaker to the listening position. ‰ Front Left (Default Value: 10.0 ft/3.00 m) Center (Default Value: 10.0 ft/3.00 m) Front Right (Default Value: 10.0 ft/3.00 m) Height Left (Default Value: 10.0 ft/3.00 m) Height Right (Default Value: 10.0 ft
  • Pioneer VSX-935 | Instruction Manual English - Page 118
    Speaker „ Dolby Enabled Speaker Change the settings of Dolby Enabled Speakers. • This setting can be selected when "Configuration" - "Height Speaker" is set to "Dolby Speaker". ‰ Distance from the ceiling (Default Value: 6.0 ft/1.80 m) Set the distance between the Dolby Enabled Speaker and the
  • Pioneer VSX-935 | Instruction Manual English - Page 119
    Audio Adjust „ Dual Mono/Mono Change the settings of multiplex audio playback. ‰ Dual Mono (Default Value: Main) Set the audio channel or language to be output when playing multiplex audio or multilingual broadcasts, etc. • For multiplex audio broadcasts, pressing the button on the remote
  • Pioneer VSX-935 | Instruction Manual English - Page 120
    Audio Adjust „ Volume Change the Volume settings. ‰ Mute Level (Default Value: -∞ dB) Set the volume lowered from the listening volume when muting is on. Select a value from "-∞ dB", "-40 dB" and "-20 dB". ‰ Volume Limit (Default Value: Off) Set the maximum value to prevent the volume from becoming
  • Pioneer VSX-935 | Instruction Manual English - Page 121
    Source „ Input Volume Absorber Adjust the volume level when there are differences in volume level among multiple devices connected to this unit. Select the input selector to make the setting. ‰ Input Volume Absorber (Default Value: 0.0 dB) Select a value between "-12.0 dB" and "+12.0 dB". Set a
  • Pioneer VSX-935 | Instruction Manual English - Page 122
    OPTICAL When giving priority to input signal from ARC compatible TV. • This item can be selected only when "Hardware" - "HDMI" - "Audio Return Channel (eARC supported)" is set to "On" and also the "TV" input is selected. When giving priority to input signal from HDMI IN jacks • This item can be
  • Pioneer VSX-935 | Instruction Manual English - Page 123
    Hardware „ HDMI Change the settings of the HDMI function. ‰ HDMI CEC (Default Value: On) Setting this to "On" enables the input selection link and other link functions with HDMI-connected CEC-compatible device. When this setting is changed, turn off and then on again the power of all connected
  • Pioneer VSX-935 | Instruction Manual English - Page 124
    is off on the TV, there may be audio output from both the TV speakers and the speakers of this unit. ‰ Audio Return Channel (eARC supported) (Default Value: On) You can enjoy the sound of an HDMI-connected ARC-compatible TV or eARCcompatible TV through the speakers connected to the unit
  • Pioneer VSX-935 | Instruction Manual English - Page 125
    even when this unit is in standby mode when this function is "On". • Supply of power to USB devices in the standby mode is not supported for the USB port on the front panel. • When this function is set to "On", the power consumption in standby state increases, however, the increase
  • Pioneer VSX-935 | Instruction Manual English - Page 126
    Hardware „ Works with SONOS Change the settings to connect with the Sonos Connect. (SONOS-1/SONOS-2) ‰ Input Selector (Default Value: Off) Select the input selector to which the Sonos Connect is connected. • Selecting "Off" disables the interlock function with Sonos. ‰ Connected Device (Default
  • Pioneer VSX-935 | Instruction Manual English - Page 127
    Multi Zone „ Zone 2 Change the settings for Zone 2. ‰ Volume Limit (Default Value: Off) Set the maximum value for Zone 2 to avoid too high volume. Select "Off" or a value between "-32 dB" and "+17 dB". ‰ Power On Level (Default Value: Last) Set the Zone 2 volume level of when this unit is turned on.
  • Pioneer VSX-935 | Instruction Manual English - Page 128
    Miscellaneous „ Tuner Change the settings for Tuner. ‰ AM/FM Frequency Step (North American models) (Default Value:10 kHz / 0.2 MHz) Select a frequency step to suit your residential area. Select "10 kHz/0.2 MHz" or "9 kHz/0.05 MHz". • When this setting is changed, all radio presets are deleted. ‰
  • Pioneer VSX-935 | Instruction Manual English - Page 129
    Miscellaneous „ Firmware Update Change the settings for Firmware Update. ‰ Update Notice (Default Value: Enable) Availability of a firmware update is notified via network. Enable Disable Notify updates Do not notify updates ‰ Version (Default Value: -) The current firmware version is displayed.
  • Pioneer VSX-935 | Instruction Manual English - Page 130
    MCACC Menu operations Setup Setup the speakers automatically or make desired changes to the equalizer. You can also check the values set currently for each speaker setting. Use the on-screen displays (OSD) that appear on the TV to make the settings. Press on the remote controller to display the
  • Pioneer VSX-935 | Instruction Manual English - Page 131
    connected speakers and the noise in the surrounding environment are automatically measured. 5. The measurement results in step 4 are displayed. If there is no problem in the detection result of the speaker, select "Next" and press ENTER to output the test tone again to automatically set the settings
  • Pioneer VSX-935 | Instruction Manual English - Page 132
    adjustments while listening to something, press on the remote controller, and select the Preset you want to adjust in "AV Adjust" - "Room EQ" - "Manual EQ Select" first. Front Left, Front Right: After selecting the speaker frequency from between "63 Hz" and "16 kHz" with the cursors / , adjust
  • Pioneer VSX-935 | Instruction Manual English - Page 133
    MCACC Data Check You can check the number of speaker channels connected and the content and values you have set for each of the speaker settings. „ Speaker Setting You can check the number of speaker channels connected and the large and small settings you have set for the low range reproduction
  • Pioneer VSX-935 | Instruction Manual English - Page 134
    Network/Bluetooth Menu operations Setup Make settings related to network connections and BLUETOOTH. Use the on-screen displays (OSD) that appear on the TV to make the settings. Press on the remote controller to display the Home screen, select "Network/ Bluetooth" with the cursors on the remote
  • Pioneer VSX-935 | Instruction Manual English - Page 135
    router. • When switching between "On" and "Off(Wired)", stop the Network service. Also, when group playback is in process, cancel the group playback once, set "IP Address", "Subnet Mask", "Gateway", and "DNS Server" manually. ‰ IP Address (Default Value: 0.0.0.0) Displays/Sets the IP address.
  • Pioneer VSX-935 | Instruction Manual English - Page 136
    Network ‰ Proxy URL (Default Value: -) Displays/Sets the proxy server URL. ‰ Proxy Port (Default Value: 8080) Displays/Sets the proxy server port number when you input "Proxy URL". ‰ Friendly Name (Default Value: Pioneer VSX-935 XXXXXX) Change the device name for this unit which is shown on other
  • Pioneer VSX-935 | Instruction Manual English - Page 137
    be saved. • This function cannot be used when registering this unit to Home App. ‰ Privacy Statement (Default Value: Not Accepted) When using a network service that requires a login name, email address, password, etc., you need to agree to the Privacy Statement of our company. • This setting can be
  • Pioneer VSX-935 | Instruction Manual English - Page 138
    enabled device in advance. For information on how to clear the pairing information, refer to the BLUETOOTH wireless technology enabled device's instruction manual. ‰ Device (Default Value: -) Displays the name of the BLUETOOTH wireless technology enabled device connected to the unit. • The name is
  • Pioneer VSX-935 | Instruction Manual English - Page 139
    on the BLUETOOTH enabled device in advance. For information on how to clear the pairing information, refer to the BLUETOOTH enabled device's instruction manual. ‰ Device (Default Value: -) Displays the name of the BLUETOOTH wireless technology enabled device connected to the unit. • The name is not
  • Pioneer VSX-935 | Instruction Manual English - Page 140
    Bluetooth ‰ Status (Default Value: -) Displays the status of the BLUETOOTH wireless technology enabled device connected to the unit. Ready Pairing Connected Connected (aptX) Connected (aptX HD) Not paired Paired Successfully connected Successfully connected with aptX compatible device
  • Pioneer VSX-935 | Instruction Manual English - Page 141
    from "Wi-Fi Setup" to connect. DHCP: You can change DHCP settings. If you select "Off", set "IP Address", "Subnet Mask", "Gateway" and "DNS Server" manually. Proxy: Display and set the URL for the proxy server. 6. After changing the settings, select "Save" to save the settings. 141
  • Pioneer VSX-935 | Instruction Manual English - Page 142
    Setup Initial Setup with Auto Start-up Wizard Operations TV's REMOTE INPUT TV Inputs TV HDMI 1 HDMI 2 HDMI 3 When you turn the unit on for the first time after purchase, the Initial Setup screen is automatically displayed on the TV to allow you to make settings required for startup using
  • Pioneer VSX-935 | Instruction Manual English - Page 143
    on the SSID list screen, press ENTER, and then follow the onscreen instructions. Setup Keyboard Input To switch between upper and lower cases, select "A/a" the test tone. Press ENTER after confirmation. 4. If there is no problem with the speaker connection, select "Next" and press ENTER. To return
  • Pioneer VSX-935 | Instruction Manual English - Page 144
    in addition to the main room. 3. ARC Setup If you have connected a TV that supports ARC, select "Yes" and press ENTER. 4. Full Auto MCACC Place the supplied speaker The measurement results in step 3 are displayed. If there is no problem in the detection result of the speaker, select "Next" and press
  • Pioneer VSX-935 | Instruction Manual English - Page 145
    adjusting the volume, you can also select a radio station or network service (internet radio or play of a music file) without looking at the located), but also in the separate room (ZONE 2). • Playing internet radio services (TuneIn Radio, etc.) and selecting stations. Control in the palm of your
  • Pioneer VSX-935 | Instruction Manual English - Page 146
    is operating erratically 148 Try restarting the unit 148 Resetting the unit (this resets the unit settings to the default) 148 Troubleshooting 149 „ Power 149 „ Audio 149 „ Listening Modes 151 „ Video 152 „ Linked operation 153 „ Tuner 153 „ BLUETOOTH function 153 „ Network
  • Pioneer VSX-935 | Instruction Manual English - Page 147
    and operating procedure. Try the simple measures on both the unit and the connected device. If the problem is that the video or audio is not output or the HDMI linked operation does not work, disconnecting important data, make sure that the material will be recorded correctly. Troubleshooting 147
  • Pioneer VSX-935 | Instruction Manual English - Page 148
    , and then restart the unit. (The settings on this unit are kept.) If the problem persists after restarting the unit, unplug and plug the power cords or HDMI cable of this unit and connected devices. Troubleshooting ‰ Resetting the unit (this resets the unit settings to the default) If the restart
  • Pioneer VSX-935 | Instruction Manual English - Page 149
    Troubleshooting Troubleshooting „ Power ‰ When the power cord from the outlet immediately, and contact the dealer or our company's support. „ Audio • Make sure that the speaker setup microphone is no longer connected if the problem persists after you have confirmed the above. ( →p124) 149
  • Pioneer VSX-935 | Instruction Manual English - Page 150
    Troubleshooting ‰ No sound from the TV • Change the input selector on this unit to the position of the terminal to which the TV is connected. • If the TV doesn't support the ARC function, along with connection by HDMI, connect the TV and this unit using a digital optical cable. ‰ No sound from a
  • Pioneer VSX-935 | Instruction Manual English - Page 151
    Troubleshooting ‰ Noise can be heard • Using cable ties to bundle audio pin cables, power the display of the main unit, and you can check the input format. Check the following if the problem persists after you have confirmed the above. ‰ Cannot select a desired listening mode • Depending on the
  • Pioneer VSX-935 | Instruction Manual English - Page 152
    Troubleshooting ‰ on the monitor side such as a TV. Check the following if the problem persists after you have confirmed the above. ‰ No image appears • Change IN jack is not displayed. In this case, the TV does not support the resolution of the video input from the player. Change the setting
  • Pioneer VSX-935 | Instruction Manual English - Page 153
    Troubleshooting to set HDMI linking on the CEC-compliant device. Check the instruction manual. • When connecting a Sharp brand player or recorder to the effective. • BLUETOOTH enabled devices must support the A2DP profile. • Because a radio problem persists after you have confirmed the above. 153
  • Pioneer VSX-935 | Instruction Manual English - Page 154
    Troubleshooting ‰ Cannot transmit from a BLUETOOTH wireless technology enabled device (PC, smartphone, etc.) on how to clear the pairing information, refer to the BLUETOOTH enabled device's instruction manual. Finally, perform pairing again. Refer to "Transmitting audio from this unit to BLUETOOTH
  • Pioneer VSX-935 | Instruction Manual English - Page 155
    Troubleshooting ‰ Sound is interrupted • There maybe a problem problem persists after you have confirmed the above. ‰ Cannot access the Internet radio • In the case the service provider has terminated the service, the network service modem you are using are supported by your ISP. ‰ Cannot access
  • Pioneer VSX-935 | Instruction Manual English - Page 156
    Troubleshooting • Connection to an SSID that includes multi-byte characters is not supported. Set the SSID of the wireless LAN router using single-byte alphanumeric problems by changing the channel of your wireless LAN router. For instructions on changing channels, refer to the instruction manual
  • Pioneer VSX-935 | Instruction Manual English - Page 157
    Troubleshooting „ ZONE B function ‰ Cannot output audio to ZONE B • To output audio to ZONE B, set the audio output destination for "Audio" - "Zone B" on AV Adjust to "On (A+B)"
  • Pioneer VSX-935 | Instruction Manual English - Page 158
    Troubleshooting „ Others ‰ Strange noise can be heard from the unit • If you have connected another device to the same outlet as this unit, strange noise may
  • Pioneer VSX-935 | Instruction Manual English - Page 159
    Appendix Appendix Speaker Layouts and Selectable Listening Modes 160 Input Formats and Selectable Listening Modes 163 Listening Mode Effects 167 Speaker combinations 171 General Specifications 173 159
  • Pioneer VSX-935 | Instruction Manual English - Page 160
    Speaker Layouts and Selectable Listening Modes See the following table for selectable listening modes for each speaker layout. Listening mode Speaker layout (ch) 2.1 3.1 4.1 5.1 6.1 DD (Dolby Audio - DD) (*1) (*1) (*1) (*2) DD+ (Dolby Audio - DD+) (*1) (*1) (*1) (*1) DTHD (Dolby Audio -
  • Pioneer VSX-935 | Instruction Manual English - Page 161
    Listening mode DTS ES Discrete (DTS-ES Discrete) ES Matrix (DTS-ES Matrix) DTS 96/24 DTS-HD HR (DTS-HD High Resolution) DTS-HD Master (DTS-HD Master Audio) DTS Express DTS:X DTS Neural:X DTS Virtual:X Speaker layout (ch) 2.1 3.1 4.1 5.1 6.1 7.1 2.1.2 3.1.2 4.1.2 5.1.2 (*3) (*3) (*3) (*3) (*3) (*3)
  • Pioneer VSX-935 | Instruction Manual English - Page 162
    Listening mode PCM DSD Stereo Mono Mono Music Ext.Stereo Classical Ent.Show (Entertainment Show) Drama Unplugged Action AdvancedGame Rock/Pop Sports F.S.Surround (Front Stage Surround) Speaker layout (ch) 2.1 3.1 4.1 5.1 6.1 7.1 2.1.2 3.1.2 4.1.2 5.1.2 (*1) (*1) (*1) (*1) (*1) (*3) (*3) (*3) (*3)
  • Pioneer VSX-935 | Instruction Manual English - Page 163
    Input Formats and Selectable Listening Modes Appendix You can select a variety of listening modes according to the audio format of the signal to be input. • The Stereo mode can be selected with any audio format. • When analog signals are being input in the Pure Direct mode, the modes switches to
  • Pioneer VSX-935 | Instruction Manual English - Page 164
    Listening mode Input format DTS (*2) 2-channel signal input Analog / PCM Music files / DSD (*1) DD / DD+ / DTHD DTS / DTS 96/24 / DTS Express / DTS-HD HR / DTS-HD MSTR Multi-channel signal input Multich PCM DSD (*1) DD DD+ DTHD ATMOS DTS DTS 96/24 DTS Express DTS-HD HR DTS-HD MSTR
  • Pioneer VSX-935 | Instruction Manual English - Page 165
    Listening mode PCM (Multich Input format PCM) (*2) DSD (*2)(*12) 2-channel signal input Analog / PCM Music files / DSD (*1) DD / DD+ / DTHD DTS / DTS 96/24 / DTS Express / DTS-HD HR / DTS-HD MSTR Multi-channel signal input Multich PCM DSD (*1) DD DD+ DTHD ATMOS DTS DTS 96/24 DTS Express DTS-HD
  • Pioneer VSX-935 | Instruction Manual English - Page 166
    Appendix (*1) You cannot select any mode other than Pure Direct, Stereo, Ext.Stereo and Mono Music if the sampling rate is 5.6/11.2 MHz. (*2) A center speaker or surround speakers need to be installed. (*3) If the input source is Blu-ray Disc and the speaker layout is 5.1 ch or less, DD+ cannot be
  • Pioneer VSX-935 | Instruction Manual English - Page 167
    Listening Mode Effects In alphabetical order „ Action Mode suitable for movies with a lot of action scenes. „ AdvancedGame Mode suitable for game content. „ Classical Suitable for classical or operatic music. This mode emphasizes the surround channels in order to widen the sound image, and simulates
  • Pioneer VSX-935 | Instruction Manual English - Page 168
    to give clarity to voices and create a realistic acoustic image. „ DSD This mode is suitable for playing sources recorded in DSD. • This unit supports the DSD signal input from the HDMI input terminal. However, depending on the connected player, better sound may be obtained by setting the output on
  • Pioneer VSX-935 | Instruction Manual English - Page 169
    on 5.1 ch for Blu-ray Discs. It is possible to record a maximum of 7.1 channels with additional channels such as the surround back channel. It also supports low bit rates. • To enable transfer of this audio format, connect via an HDMI cable and set the audio output on the player to Bitstream
  • Pioneer VSX-935 | Instruction Manual English - Page 170
    „ DTS:X This mode faithfully reproduces the sound design recorded in the DTS:X audio format. The DTS:X audio format is a combination of the mixing method based on traditional channel based formats (5.1 ch and 7.1 ch) and object based dynamic audio mixing, and it is characterized by the precise
  • Pioneer VSX-935 | Instruction Manual English - Page 171
    Speaker combinations Appendix • Up to two powered subwoofers can be connected in either combination. (North American models) Speaker Channels 2.1 ch 3.1 ch 4.1 ch 5.1 ch 6.1 ch 7.1 ch 2.1.2 ch 3.1.2 ch 4.1.2 ch 5.1.2 ch FRONT CENTER SURROUND SURROUND BACK (*2) (*2) HEIGHT (*3) (*3) (*4) (*4)
  • Pioneer VSX-935 | Instruction Manual English - Page 172
    (European, Australian and Asian models) Speaker Channels 2.1 ch 3.1 ch 4.1 ch 5.1 ch 6.1 ch 7.1 ch 2.1.2 ch 3.1.2 ch 4.1.2 ch 5.1.2 ch FRONT CENTER SURROUND SURROUND BACK HEIGHT (*2) (*2) Appendix Bi-AMP (*1) (*1) (*1) (*1) ZONE 2 (ZONE SPEAKER) (*1) (*1) (*1) (*1) (*1) (*2) (*1) (*1)
  • Pioneer VSX-935 | Instruction Manual English - Page 173
    Impedance Phono Maximum Input Signal Voltage Frequency Response Tone Control Characteristics Signal to Noise Ratio Speaker Impedance Headphone Rated Output Supported impedance of Headphones Headphones Frequency Response North American models With 8 ohm loads, both channels driven, from 20-20,000 Hz
  • Pioneer VSX-935 | Instruction Manual English - Page 174
    Range DAB Tuning Frequency Range DAB Sensitivity Preset Channel BLUETOOTH Section Communication system Frequency band Modulation method Compatible BLUETOOTH profiles Supported Codecs Transmission range (A2DP) Maximum communication range North American models 87.5 MHz - 107.9 MHz 530 kHz - 1710 kHz
  • Pioneer VSX-935 | Instruction Manual English - Page 175
    Appendix HDMI North American models European models Australian and Asian models Input 6 Output 2 (MAIN, SUB/ZONE2) HDMI Ver bandwidth ALLM VRR (for Game) QMS (for Movie) FVA (for Game) QFT (for Movie) DSC Uncompressed Compressed (TV needs DSC) ARC / eARC *2 HDR10 (HDR10, BT.2020, HLG) HDR10
  • Pioneer VSX-935 | Instruction Manual English - Page 176
    -screen display when you perform such operations as using the Quick Menu or adjusting the volume. (*2)5K, 48 Hz, YCbCr4:2:0, 8/10/12 bit is not supported. 176
  • Pioneer VSX-935 | Instruction Manual English - Page 177
    with the same resolution as the input resolution. When a TV supporting 4K is used, HDMI video signals with 1080p can be output Between 5 kbps and 320 kbps, and VBR • WMA Pro/Voice/WMA Lossless formats are not supported. WAV (.wav) WAV files contain uncompressed PCM digital audio. • 44.1 kHz, 48 kHz
  • Pioneer VSX-935 | Instruction Manual English - Page 178
    USB Section ■USB Storage Device ( →p97) Supported Audio Formats Appendix North American models European models Australian Between 5 kbps and 320 kbps, and VBR • WMA Pro/Voice/WMA Lossless formats are not supported. WAV (.wav) WAV files contain uncompressed PCM digital audio. • 44.1 kHz, 48 kHz,
  • Pioneer VSX-935 | Instruction Manual English - Page 179
    Appendix General North American models European models Australian and Asian models Power Supply AC 120 V, 60 Hz AC 220 - 240 V, 50/60 Hz Power Consumption 460 W 450 W Full Standby mode 0.10 W 0.15 W Network Standby (wired) 1.6 W 1.8 W Network Standby (wireless) 1.7 W 1.8 W
  • Pioneer VSX-935 | Instruction Manual English - Page 180
    Appendix Australian and Asian models North American models European models Australian and Asian models 6 (Including 1 × PHONO, 1 × AUX (Front)) 2 (COAXIAL×1, OPTICAL×1) • Supported sampling rates for PCM signals (stereo, mono) from a digital input are 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
  • Pioneer VSX-935 | Instruction Manual English - Page 181
    Others North American models Setup Mic RS-232 12V TRIGGER OUT IR Specifications and features are subject to change without notice. European models 1 (Front) Not equipped Not equipped Not equipped Appendix Australian and Asian models ‰ License and Trademark 181
  • Pioneer VSX-935 | Instruction Manual English - Page 182
    SN 29403933A_EN © 2021 Onkyo Home Entertainment Corporation. All rights reserved. ©2021 Onkyo Home Entertainment Corporation, Tous droits de reproduction et de traduction réservés. https://pioneer-audiovisual.com/privacy/ "Pioneer" and "MCACC logo" are trademarks of Pioneer Corporation, and are used
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
Instruction Manual
AV RECEIVER
VSX-935
En