Pioneer VSX-935 Instruction Manual English - Page 132
Manual MCACC, EQ Adjust
View all Pioneer VSX-935 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Manual MCACC EQ Adjust If you perform Full Auto MCACC then settings are automatic, but you can also adjust the output volume of the range of each connected speaker to suit your own preferences. You can adjust the volume of the different sound ranges for each of the speakers. You can set three different equalizers in Preset 1 to 3. You can select up to 4 bands for the Subwoofer and 9 bands for all other speakers. Front Left (Default Value: 0.0 dB) Center (Default Value: 0.0 dB) Front Right (Default Value: 0.0 dB) Height Left (Default Value: 0.0 dB) Height Right (Default Value: 0.0 dB) Surround Right (Default Value: 0.0 dB) Surr Back Right (Default Value: 0.0 dB) Surr Back Left (Default Value: 0.0 dB) Surround Left (Default Value: 0.0 dB) Subwoofer (Default Value: 0.0 dB) • The result may not be as expected depending on the input source and listening mode setting. • If you want to make the adjustments while listening to something, press on the remote controller, and select the Preset you want to adjust in "AV Adjust" - "Room EQ" - "Manual EQ Select" first. Front Left, Front Right: After selecting the speaker frequency from between "63 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-12.0 dB" and "+12.0 dB" with / . • "63 Hz" can only be selected when this speaker is set to "Large" in "System Setup" - "Speaker" - "Crossover". Setup Center, Surround Right, Surround Left: After selecting the speaker frequency from between "63 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-12.0 dB" and "+12.0 dB" with / . • "63 Hz" can only be selected when this speaker is set to "Large" in "System Setup" - "Speaker" - "Crossover". • If an item cannot be selected even though connection is correct, check that the settings in "System Setup" - "Speaker" - "Configuration" - "Speaker Channels" matches the number of connected channels. Height Left, Height Right, Surr Back Right, Surr Back Left: After selecting the speaker frequency from between "63 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-12.0 dB" and "+12.0 dB" with / . • "63 Hz" can only be selected when this speaker is set to "Large" in "System Setup" - "Speaker" - "Crossover". • The setting cannot be changed if "Configuration" - "Zone Speaker" is set to "Zone 2" and Zone 2 is on. • If an item cannot be selected even though connection is correct, check that the settings in "System Setup" - "Speaker" - "Configuration" - "Speaker Channels" matches the number of connected channels. Subwoofer: After selecting the speaker frequency from between "31 Hz" and "250 Hz" with the cursors / , adjust the volume of that frequency between "-12.0 dB" and "+12.0 dB" with / . • This cannot be selected if "No" is set in "System Setup" - "Speaker" - "Configuration" - "Subwoofer". 132