Pioneer VSX-D511 Owner's Manual - Page 20

04 Controls and displays STEREO/DIRECT (pages 24-25) Switches direct playback on or off. Direct playback bypasses the tone controls and channel levels for the most accurate reproduction of a source. 16 SIGNAL SELECT (page 25, 28) Use to select between an analog or digital signal. 17 MONITOR (page 37) Press to switch tape monitoring on/off. 18 MIDNIGHT (page 26) Use when listening to movie soundtracks at low volumes. 19 LOUDNESS (page 26) Use to boost the bass and treble at low volumes. 20 TONE (page 27) Press this button to access the bass and treble controls, which you can then adjust with the MULTI JOG/INPUT SELECTOR dial. 21 QUICK SETUP (page 10) 22 MASTER VOLUME Display 1 SIGNAL AUTO DIGITAL DIGITAL ANALOG DTS 2 3 45 678 9 DIGITAL ATT DIRECT MONITOR PROLOGIC MIDNIGHT STEREO TUNED ADV.SURR. LOUDNESS MONO SP A dB 10 11 12 13 14 1 SIGNAL SELECT indicators Lights to indicate the type of input signal assigned for the current component: AUTO : Lights when AUTO signal select is on. DIGITAL : Lights when a digital audio signal is detected. 2 DIGITAL : Lights when a Dolby Digital signal is detected. ANALOG : Lights when an analog signal is detected. DTS : Lights when a source with DTS audio signal is detected. 2 DTS When the Standard mode of the receiver is on, this lights to indicate decoding of a DTS signal. 3 2 DIGITAL When the Standard mode of the receiver is on, this lights to indicate decoding of a Dolby Digital signal. 20 En