Pioneer VSX-LX102 Basic and Advanced Manual English - Page 42
Speaker, Configuration, Crossover
View all Pioneer VSX-LX102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
>>Specifications >>Advanced Setup >>Listening Modes >>Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Speaker You can make changes to the connection environment of the speakers and change the volume level. Settings are automatically configured if you use Full Auto MCACC. This setting cannot be selected if headphones are connected or audio is output from the speakers of the TV. ˙ Configuration Setting Item Speaker Channels Subwoofer Height Speaker Bi-Amp Default Value 7.1 ch Yes Top Middle No Setting Details Select "2.1 ch", "3.1 ch", "4.1 ch", "5.1 ch", "6.1 ch", "7.1 ch", "2.1.2 ch", "3.1.2 ch", "4.1.2 ch", or "5.1.2 ch" to suit the number of speaker channels connected. Set whether a subwoofer is connected or not. "Yes": When subwoofer is connected "No": When subwoofer is not connected Set the speaker type if height speakers are connected to the SURROUND BACK / HEIGHT terminals. Select "Front High", "Top Front", "Top Middle", "Top Rear", "Rear High", "Dolby Speaker (Front)", or "Dolby Speaker (Surr)" according to the type and layout of the connected speakers. • If an item cannot be selected even though connection is correct, check that the settings in "Speaker Channels" matches the number of connected channels. Set whether the front speakers are bi-amp connected. "No": When front speakers are not bi-amp connected "Yes": When front speakers are bi-amp connected • This setting cannot be selected when surround back speakers or height speakers are installed. Setting Item Speaker Impedance Default Value 6ohms Setting Details Set the impedance (Њ) of the connected speakers. "4ohms": When any of the connected speakers have 4 Њ or more to less than 6 Њ impedance "6ohms": When the connected speakers all have 6 Њ or more impedance. • For impedance, check the indications on the back of the speakers or their instruction manual. ˙ Crossover Setting Item Front Center Default Value Small Small Setting Details Set the low range capabilities for each channel by setting either small or large. "Small": For small speakers whose low range capabilities may be limited "Large": For full-range speakers with sufficient low range capabilities • If "Configuration" - "Subwoofer" is set to "No", "Front" will be fixed to "Large" and the low pitched range of the other channels will be output from the front speakers. Refer to the instruction manual of your speakers to make the setting. Set the low range capabilities for each channel by setting either small or large. "Small": For small speakers whose low range capabilities may be limited "Large": For full-range speakers with sufficient low range capabilities • When "Front" is set to "Small", this is set to "Small". • If an item cannot be selected even though connection is correct, check that the settings in "Configuration" - "Speaker Channels" matches the number of connected channels. 10