Pioneer VSX-LX302 Basic Manual English - Page 30
Multi-zone
View all Pioneer VSX-LX302 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
> Before Start > Part Names > Install > Initial Setup > Playback Multi-zone 1 2 3 To return the remote controller to main room control mode: While holding down MODE on the remote controller, press MAIN (c) for 3 seconds or more until the remote indicator flashes once. a b Basic Operations unit is on. the remote controller. You can enjoy audio in the separate room by, for example, playing a Blu-ray Disc player in the main room (where this unit is located) and listening to internet radio in the separate room (ZONE 2). 0 DSD and Dolby TrueHD audio signals are not output to ZONE 2 when selected with the "NET" or "USB" input selector. 0 You can only select the same inputs for 1. While holding down MODE (e) on the remote controller, press ZONE 2 (d) for 3 or more seconds until the remote indicator blinks twice. 0 The remote controller switches to the mode for controlling ZONE 2. 2. Point the remote controller at the main unit and press Í (a). "Z2" lights on the main unit display. 0 To control on the main unit, press ZONE 2-CONTROL and adjust with the MASTER VOLUME control within 8 seconds. To turn off the function: Press Í while in the mode for controlling ZONE 2 on the remote controller. Alternatively press ZONE 2-ON/OFF on the main unit. the main room and separate room with the "NET", "BLUETOOTH", or "USB" input selector. If you have "NET" Playing in ZONE 2 only: If you turn the unit to standby during multi- c selected in the main room and then select "BLUETOOTH" in the separate room, the main room also switches to "BLUETOOTH". You cannot select different stations for the main room and separate room with the AM/FM radio. 3. Press the input selector button (b) of the input to be played in the separate room. 0 On the main unit, after pressing ZONE 2-CONTROL, within 8 seconds turn the input selector dial to select the input to be played in the separate zone playback, the Z2 indicator is dimmed and the playback mode is switched to playback in a separate room only. Setting ZONE 2 to on while this unit is in standby will also switch the playback mode to the same setting. d e 0 If ZONE 2 is on, power consumption room. during standby becomes larger than 4. To adjust the volume on the power normal. amplifier in the separate room or the Perform the following procedure when the ZONE speaker, adjust with VOL+/- on 30