Pioneer VSX-LX505 Instruction Manual English - Page 154
Manual MCACC, EQ Adjust
View all Pioneer VSX-LX505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Manual MCACC EQ Adjust You can adjust the output volume of the range of each connected speaker how you like while listening to test noises. You can adjust the volume of the different sound ranges for each of the speakers. You can select up to 4 bands for the Subwoofer and 9 bands for all other speakers. If the overall volume balance changes by adjusting the volume of each frequency, you can readjust the balance in "Trim". Front Left (Default Value: 0.0 dB) Center (Default Value: 0.0 dB) Front Right (Default Value: 0.0 dB) Height 1 Left (Default Value: 0.0 dB) Height 1 Right (Default Value: 0.0 dB) Height 2 Left (Default Value: 0.0 dB) Height 2 Right (Default Value: 0.0 dB) Surround Right (Default Value: 0.0 dB) Surr Back Right (Default Value: 0.0 dB) Surr Back Left (Default Value: 0.0 dB) Surround Left (Default Value: 0.0 dB) Subwoofer (Default Value: 0.0 dB) • The result may not be as expected depending on the input source and listening mode setting. Setup Front Left, Front Right: After selecting the speaker frequency from between "63 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-12.0 dB" and "+12.0 dB" with / . To readjust the overall volume balance with "Trim", select "Trim" in / , and use / to adjust the volume. • If "OVER!" is displayed during adjustment, the volume of the frequency band or another frequency band is too high, so reduce the volume of the frequency bands until the display disappears. • "63 Hz" can only be selected when this speaker is set to "Large" in "System Setup" - "Speaker" - "Crossover". Center, Surround Right, Surround Left: After selecting the speaker frequency from between "63 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-12.0 dB" and "+12.0 dB" with / . To readjust the overall volume balance with "Trim", select "Trim" in / , and use / to adjust the volume. • If "OVER!" is displayed during adjustment, the volume of the frequency band or another frequency band is too high, so reduce the volume of the frequency bands until the display disappears. • "63 Hz" can only be selected when this speaker is set to "Large" in "System Setup" - "Speaker" - "Crossover". • If an item cannot be selected even though connection is correct, check that the settings in "System Setup" - "Speaker" - "Configuration" - "Speaker Channels" matches the number of connected channels. 154