Pioneer W6200 Owners Manual - Page 17

ENGLISH ESPAÑOL DEUTSCH Brightness [BRIGHTNESS] You can make black appear darker or lighter (-24 to +24). Contrast [CONTRAST] You can make narrow or widen the gap between black and white (darken) (-24 to +24). Color [COLOR] You can make colors appear lighter or darker (-24 to +24). Hue [HUE] You can adjust the red or green of the picture (-24 to +24). Note: • [HUE] cannot be adjusted for PAL video. Location [LOCATION] When using the display for the first time, set its mounting location. [FRONT]: This product is installed on the dashboard or another location where the driver can see the display. [REAR]: This product is installed in a location for viewing by rear seat passengers (in a location where the driver cannot see the display). Note: • When [LOCATION] has been set to [FRONT], the video cannot be viewed while the vehicle is moving. The setup function screen also cannot be displayed while the vehicle is moving. ([ATTENTION] will be displayed while the vehicle is moving.) Stop the vehicle in a safe place, apply the parking brake and wait for [ATTENTION] to be cleared before starting operation. Speaker [SPEAKER] You can select [ON] or [OFF] for the audio from the built-in speaker. Color System [COLOR SYSTEM] You can select [NTSC] or [PAL] video for the color system. (The initial setting is [PAL].) The setting is stored for each source (VIDEO1, VIDEO2). Note: • If the setting of the color system is inadequate for the external component, images will not be correctly reproduced. 16 FRANÇAIS ITALIANO NEDERLANDS