Pioneer XW-NAV1-K Operating Instructions - Page 16

04 iPod/iPhone playback Connecting your iPod/iPhone Caution • When connecting an iPod/iPhone units, always use the universal dock adapter provided with your iPod/iPhone, or a commercially adapter designed to support iPod/iPhone. The iPod/iPhone cannot be connected without a universal dock adapter; attempting to connect an iPod/ iPhone without a universal dock adapter will cause damage or malfunction. of the adapter into the depressions on the iPod/iPhone connector port and press into position. When attaching the adapter, be careful not to strike the connectors. 2 Connect your iPod/iPhone. • If an iPod/iPhone is connected when this unit is in standby mode, the power will turn on and playback of the iPod/iPhone will begin. Connecting your TV1 To watch iPod/iPhone images on a television, perform connections using the included audio/ video cable. For details, see Connecting using an audio/video cable on page 8. • When an iPod/iPhone is connected to this unit, the iPod/iPhone's TV output setting is automatically set to ON.2 MENU iPod nano/ iPod classic/ iPod touch/ iPhone   Caution • Before making or changing the connections, switch off the power and disconnect the power cord from the power outlet. Plugging in should be the final step.  adapter Universal dock 1 Attach the Universal dock adapter to iPod/iPhone connector port on the front panel of this unit. • An iPod/iPhone universal dock adapter is not supplied with this unit. When attaching the Universal dock adapter, be sure to orient the front-back directions of the Universal dock adapter correctly. To attach, first place the protruding tabs on the front side Note 1 For detailed instructions on using the iPod/iPhone, please refer to the manual supplied with the iPod/iPhone. 2 • Some iPods allow the TV output setting to be changed while connected. • When the iPod/iPhone is disconnected from this unit, the iPod/iPhone's TV output setting returns to its original state. 16 En