Pioneer djm909 Owner's Manual - Page 19
Effect Functions
UPC - 012562666723
View all Pioneer djm909 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
EFFECT FUNCTIONS Types of Effects This unit is equipped with a beat effector linked to the BPM, and fader effector linked to the channel or cross fader, producing a total of 50 basic effects, but an even wider variety of effects can be produced by varying the parameters of each effect. Beat Effector (effects linked to BPM) Name Function 1 DELAY (*1) In time with BPM, outputs repeat sound once. 2 ECHO (*1) In time with BPM, outputs repeat sound several times, while diminishing. 3 PAN ECHO (*1) In time with BPM, outputs repeat sound, alternately to left and right. 4 PITCH ECHO (*1) In time with BPM, outputs repeat sound while changing pitch. 5 REVERSE DELAY (*1) In time with BPM, outputs repeat sound in reverse of playback direction. 6 DUCKING ECHO (*1) Outputs repeat sound when input sound level drops below a certain point. 7 ROLL (*2) With the turning ON of the EFFECT switch as a trigger, the input sound is recorded, and the recorded sound is repeated in units of individual beat. 8 HOLD ECHO (*1) (*2) In time with BPM, outputs repeat sound several times while diminishing. Repeat sound is preserved even if EFFECT switch is turned OFF. 9 MULTI TAP DELAY (*1) Output delay sound in time with beat, at intervals of preset delay time. 10 RAIN (*1) Outputs sound with feeling of being in water. 11 REVERB1 (*1) Produces reverberation sound similar to that of a garage-sized room. 12 REVERB2 (*1) Produces reverberation sound similar to that of a large hall. 13 REVERB3 (*1) Hall reverberation (echo) is added to sound lag timed to BPM. 14 PITCH SHIFTER1 Allows changing of pitch within range of ± 1 octave. 15 PITCH SHIFTER2 Outputs three types of pitches together with preset pitches. 16 PAN In time with BPM, outputs sound alternately to left and right. 17 TRANS In time with BPM, cut sound. 18 RHYTHM TRANS Cut sound in time with BPM and preset pattern. 19 TRANS PAN In time with BPM, cut long-period PAN outputs at set time. 20 TREMOLO Produces wavering sound by applying tonal modulation. 21 VIBRATO Apply modulation to frequency, thus producing tonal variation. FX ADJ. Parameter (touch panel) Set delay time of 1/8 to 8/1 of each beat of BPM. Set delay time of 1/8 to 8/1 of each beat of BPM. Set delay time of 1/8 to 8/1 of each beat of BPM. Set delay time of 1/8 to 2/1 of each beat of BPM; and set pitch shifter up or down. Set delay time of 1/8 to 8/1 of each beat of BPM. Set delay time of 1/8 to 8/1 of each beat of BPM. Set effect time of 1/8 to 8/1 of each beat of BPM. Set delay time of 1/8 to 8/1 of each beat of BPM. Set delay time of 1/4 to 1/1 of each beat of BPM; select delay pattern; and set feedback ON/OFF. Set delay time of 1/8 to 8/1 of each beat of BPM. 8 patterns can be set based on different filters. 8 patterns can be set based on different filters. Set delay time of 1/8 to 4/1 of each beat of BPM. Set amount of pitch shift. Set type of changing pitch harmonies. Set right-left allocation time in units of 1/8 to 8/1 of each beat of BPM. Set cut time in units of 1/8 to 8/1 of each beat of BPM. Set effect time of 1/2 to 2/1 of each beat of BPM; and select cut pattern. Set cut time in units of 1/16 to 1/1 of each beat of BPM; and set PAN period. Set modulation period based on beats calculated from BPM. Set modulation period based on beats calculated from BPM. (*1) When the channel fader or cross fader is used to lowering sound volume, no effect sounds will be heard, even if monitor SELECT switch is set to the [EFFECT] position. (*2) When EFFECT switch is turned OFF, no effect sounds will be heard even if the monitor SELECT switch is set to the [EFFECT] position. 19