Plantronics 510S Service Guide - Page 17

Voyager 510S Lights and Tones Indicator Lights Base Status Headset and base unit are on and a wireless connection is established Headset charging Headset fully charged Bluetooth link active Headset in talk mode Headset out of range or turned off Base Light Solid red Flashes yellow Solid yellow Solid blue Flashes blue Red flashes slowly, then quickly (cycle then repeats slow & fast) Headset Status Power on Charging Fully charged Battery low Pairing Bluetooth device connected Status Indicator Light Flashes blue Flashes red Solid blue Flashes red Flashes red and blue Flashes blue Tones Out of Range Warning: If you walk out of range of your base, your headset will issue audible tones at its operating limit. If you are on a call, you will hear two tones when reaching edge of range, and again when back in range. If you stray out of range, active calls will be suspended. Calls will be re-established with base when walking back into range. If you remain out of range for more than 10 minutes the system will drop the call. Cell phones may or may not reconnect to headset on its own when back in range. Low Battery Warning: When battery is low, a single tone repeats every ten seconds. You should recharge the headset immediately. Mute Warning/Reminder: When Mute is first activated, a single high tone followed by a single low tone will sound. These tones will repeat every 30 seconds while Mute is active. When Mute is deactivated a single low tone followed by a single high tone will sound. Mute Reminder - A double low tone will sound every 30 seconds as a reminder that mute is activated. Call Connect/Device Connect: Single high tone Call Disconnect/Device Disconnect: Single low tone Questions? For fast, efficient Technical Support call: 800-544-4660 Ext. 5538 17