Plantronics CS540 User Guide - Page 14

Extender Arm, Ringer Microphone

Page 14 highlights

If You Do Not Hear a Dial Tone 1 If you do not hear a dial tone, raise the lifter height switch to the next highest position. 2 Repeat steps 2 through 5 above as necessary until you hear a dial tone. 3 When you hear a dial tone, secure the lifter as described in steps 6 though 8. Additional Parts (if required) Use extender arm when the handset lifter needs additional stability lifting and returning handset to cradle. Extender Arm 1 Slide extender arm onto lifter. 2 Stabilizers can be shifted left and right. Position stabilizers on outsides of handset to gently grip the phone. 2 1 2 Ringer Microphone Use ringer microphone only when the telephone speaker is not located directly under the handset. 1 Remove cover from ringer microphone jack on back of lifter. 2 Connect ringer microphone plug. 3 Place ringer microphone over phone speaker. Remove adhesive tape and attach. 1 3 2 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

14
If You Do Not Hear a Dial Tone
1
If you do not hear a dial tone, raise the lifter height switch to the next highest position.
2
Repeat steps 2 through 5 above as necessary until you hear a dial tone.
3
When you hear a dial tone, secure the lifter as described in steps 6 though 8.
Additional Parts (if required)
Use extender arm when the handset lifter needs additional stability lifting and returning
handset to cradle.
Extender Arm
1
Slide extender arm onto lifter.
2
Stabilizers can be shifted left and right. Position stabilizers on outsides of handset to gently
grip the phone.
1
2
2
Ringer Microphone
Use ringer microphone only when the telephone speaker is not located directly under the
handset.
1
Remove cover from ringer microphone jack on back of lifter.
2
Connect ringer microphone plug.
3
Place ringer microphone over phone speaker. Remove adhesive tape and attach.
1
2
3