Plantronics DISCOVERY 665 User Guide - Page 10
Additional Features, Moving Out Of Range - manual
View all Plantronics DISCOVERY 665 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
USING YOUR HEADSET ADDITIONAL FEATURES Redialing Last Number To activate last number redial, double press the call control button. You will hear a high tone after each double key press. Power Saving Mode Power saving mode temporarily disables the digital signal processing (DSP) feature of the Discovery 655 and 665 headsets to provide a longer talktime. To enable power saving mode, press both the volume up and down keys at the same time before you make a call. To re-enable DSP, press both the volume up and down keys at the same time. Power saving mode cannot be turned on while engaged in a call. NOTE After you turn off the headset, DSP will be re-enabled the next time you turn it on. Using Voice Dialing With the headset on, press and hold the call control button for 2 seconds to activate voice dialing. NOTE To use voice activated dialing, the voice dialing feature must be enabled on your phone. See your Bluetooth phone manual for instructions. Rejecting a Call When receiving an incoming call, press and hold the call control button for 8 seconds to reject the call. Switching a Call from Phone to Headset To switch an active call from your phone to your headset, briefly press the call control button for 2 seconds. Switching a Call from Headset to Phone To switch an active call from your headset to your phone, press and hold the call control button for 2 seconds. MOVING OUT OF RANGE As the headset moves more than 33 feet (10 meters) away from the Bluetooth device or encounters interference: • Audio quality will degrade • A beep will be heard in the headset when the connection drops between headset and Bluetooth device • When out of range, only the power off function will operate If any of the above occur, move closer to your Bluetooth device. 10