Plantronics Explorer 390 User Guide - Page 13

Using More Than One Bluetooth Phone [Explorer 390 series only] Plantronics Explorer 390 supports multipoint technology, which allows you to use one headset with two different Bluetooth mobile phones. How to Enter Pairing Mode if Headset Was Paired Before While the headset is off, press and hold the call control button for 4 seconds. The indicator light will flash blue twice. You wlll hear a brief low tone. See steps 1, 3 and 4 of "Pairing Your Headset" on page 4 to pair your headset with your second phone. If not paired in 2 minutes, the headset will automatically exit pairing mode. How to Initiate a Call The headset initiates a call on the phone you most recently used. To use the second paired phone, initiate the call using the controls on the second phone. The second phone forms an active link with the headset. How to Answer a Call on One Phone While Talking on the Other Phone To answer the second call, you must end the first call. You can't place one call on hold while answering a call from the other phone. 1 Press the call control button once to hang up the existing call. 2 Answer the second call on the phone. 3 While the call is in progress, transfer the call from the phone to your headset by pressing and holding the headset call control button for 2 seconds. You will hear a brief low tone before the call is transferred. note If you choose not to answer the second call, and you have voice mail on the second phone, the call will go to voice mail. 9