Polaroid FLM-3201 Operation Manual - Page 23

Basic Operations Changing Channels Using the Channel Buttons (CH+ or CH-) Press the CH+ or CH- to change channels. When you press the CH+ or CH-, the unit changes channels in sequence. You will see all the channels that the unit has memorized. You will not see channels that were erased. Direct Accessing Channels Press the number buttons to go directly to a channel. To select a one-digit channel: press the 0-9 number buttons, followed by ENTER button or wait for some seconds, and the unit automatically goes to the selected channel. To select a two-digit channel: in TV mode, press the 0-9 number buttons to directly go to the selected channel; while in Cable mode, press the 0-9 number buttons , followed by ENTER button or wait for a few seconds, and the unit goes to the selected channel. To select a three-digit channel: press the 0-9 number buttons to input the channel number, then the unit goes to the selected channel. Note: When you use the number buttons, you can directly select channels that were erased. Using the LAST button Press this button to switch between the current channel and the last viewed channel. Adjusting the Volume Using the volume buttons (VOL+ and VOL-) Press the VOL + or VOL- to increase or decrease the volume. Using the Mute Using the MUTE button At any time, you can temporarily cut off the sound using the MUTE button. 1 Press the MUTE button and the sound cuts off. 2 To turn mute off, press the MUTE button again. 20