Polaroid PDV-1002A Operation Manual - Page 17
Attaching The Battery Pack, Charging The Battery Pack, Detaching The Battery Pack - power cord
View all Polaroid PDV-1002A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Power Supply Attaching The Battery Pack The player's power is supplied via the switching power adapter or the battery pack, which are provided with the player. Steps for connecting the battery pack to the player are as follows: Attaching the Battery Pack Turn the player upside down on a smooth, clean surface. Direct the battery so that the battery contacts and the five plastic tabs are aligned with the matching contacts and tab recesses on the player. Lock the Battery Pack With one hand on the player to prevent it from moving, push the battery pack on to the player then slide the Battery Pack toward the front of the Player until you hear it click and lock into place. Charging The Battery Pack Plug the Power Adapter into the Player's DC-IN 12 V Jack, which is located on Right Side of the player, and then plug the other end of the Power Cord into a household wall Power Outlet. See the right figure. Detaching The Battery Pack If the player is not going to be used for a long period of time, we recommend that you detach the Battery Pack. Even if the unit is powered down, the unit is still consuming some power in STANDBY mode. This could lead to discharging the battery. Make sure the power is turned off before detaching the Battery Pack. After detaching the battery pack, take care when handling the unit. 1. Hold player in position so it doesn't slide. Press the tab towards the front of the unit and hold it in the position. 2. Taking off the Battery Pack Gently slide the Battery Pack toward the back of the Unit. Carefully lift the Battery Pack from your player. - 17 -