Polaroid POLAROID SPECTRA AF User Guide - Page 25

Guide to better pictures 17

Page 25 highlights

Repeated spots or bar pattern Guide to better pictures 17 Cause Solution • Developer rollers inside the • Open film door in indirect film door need to be light (do not remove film). cleaned. While turning rollers, clean them with a lint-free cloth dampened with water. Damaged picture Cause Solution • Picture was shaken back and forth or bent shortly after it ejected from the camera. • Picture was left in the exit slot, and camera was set down on a table or other surface. • During first 60 seconds of development, handle print gently; hold it only by its wide white border, and do not wave or bend it. • Remove print from exit slot as soon as it ejects.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31

Guide to better pictures 17
Repeated spots or
bar pattern
Cause
Developer rollers inside the
film door need to be
cleaned.
Solution
Open film door in indirect
light (do not remove film).
While turning rollers, clean
them with a lint-free cloth
dampened with water.
Damaged picture
Cause
Picture was shaken back
and forth or bent shortly
after it ejected from the
camera.
Picture was left in the exit
slot, and camera was set
down on a table or other
surface.
Solution
During first 60 seconds of
development, handle print
gently; hold it only by its
wide white border, and do
not wave or bend it.
Remove print from exit slot
as soon as it ejects.