Polk Audio Command Bar User Guide 3 - Page 6
Troubleshooting, HVAD ER DER I KASSEN - remote
View all Polk Audio Command Bar manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Troubleshooting I Don't Hear Sound From My Subwoofer 1) Verify that the subwoofer is plugged into a power source. 2) Check the green light on the back of the subwoofer. • If it is solid green, turn up the Bass using the remote control. • If it is flashing green, you need to sync the subwoofer to the sound bar using the instructions below. If both lights are off, you need to connect the subwoofer to a power source. Syncing the Subwoofer to the Sound Bar 1) Verify that the sound bar and subwoofer are plugged into a power source. 2) On the back of the sound bar, press and hold the SYNC button until you hear "Entering subwoofer pairing mode," then release the button. The SUB light above the SYNC button will flash green. 3) On the back of the SUBWOOFER, press and hold the SYNC button until you hear "Subwoofer paired," (about 10 seconds) and the light on the back of the subwoofer turns solid green. 10 DK HVAD ER DER I KASSEN Sound Bar 6,5' (2m) HDMI-højhastighedskabel 6' (1,8m) optisk kabel Sound bar-strømledning Sound bar-strømforsyning Subwoofer Fjernbetjening 2 (AAA) batterier Subwoofer-strømledning Produktlitteratur 11