Polk Audio LEGEND L400 User Guide 1 - Page 6
Listening in 5.1 Surround, Listening in 7.1 Surround
View all Polk Audio LEGEND L400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Listening in 5.1 Surround You can use the Legend Series speakers as rear surround speakers in a Polk Audio home theater surround system. Ideal rear channel surround speaker placement is along a side wall, slightly behind and above the listening position. Note: If you cannot place rear surrounds along the side walls, position them along the rear wall above the listening position. FRONT LEFT SUB TV FRONT RIGHT CENTER 90º 20º REAR LEFT SURROUND 90º 20º REAR RIGHT SURROUND Rubber Feet and Adjustable Floor Spikes Rubber feet and floor spikes are included with your Legend L600 floor-standing loudspeakers to anchor and stabilize the speaker on any type of floor. In order to expose the spike, simply pull the rubber feet off. Adjusting the Floor Spikes The floor spikes can be adjusted from below and require two hands. Note: If the speaker is stable on the floor, no adjustment is necessary. If the speaker is unstable, follow these steps: 1. The speaker will be inclined to settle on three of the four spikes leaving one spike slightly off the floor. 2. Determine which spike needs to be adjusted. 3. Turn the spike clockwise to lower, and counterclockwise to raise it. Lock the washer to tighten and secure the foot. 4. As the spike contacts the floor, it will become more difficult to turn. At that point the speaker should be stabilized. 5. Tighten lock ring to prevent the spike from loosening over time. Listening in 7.1 Surround Enjoy added depth to your surround sound experience with four rear surround speakers instead of two. FRONT LEFT SUB TV FRONT RIGHT CENTER 90º 20º REAR LEFT SURROUND BACK LEFT SURROUND 90º 20º REAR RIGHT SURROUND BACK RIGHT SURROUND 1. 6